Three-quarter view of an adjustable stainless steel air shower nozzle

Alat ganti peralatan bilik bersih

Muncung pancuran udara

An adjustable stainless steel jet nozzle that directs high-velocity filtered air across garments, components and packaged materials inside an air shower.

Directional Ball Joint
Satin Stainless Steel
Four-Hole Mounting Flange
Focused Air Jet

Permintaan sebut harga Semak imbas produk

Pengenalan Produk

The air shower nozzle converts plenum airflow into a focused cleaning jet and allows its discharge direction to be set during commissioning. Its spherical eyeball rotates within a circular retaining flange, while a short smooth outlet limits unnecessary turbulence. Satin stainless-steel construction suits repeated cleaning and visually matches common air-shower interiors. Replacement work should verify flange diameter, mounting-hole pitch, outlet bore and available adjustment clearance.

Ciri-ciri Utama

The spherical center section pivots to aim the air jet toward the required cleaning zone.

A smooth circular outlet provides a defined discharge path without protruding vanes.

Four countersunk mounting holes distribute clamping around the round flange.

Satin stainless-steel surfaces provide durable, cleanable exposed hardware.

Kebimbangan Produk Pelanggan

Nozzle geometry and aiming range determine whether filtered air reaches the intended surfaces without leaving sheltered zones.

A fixed outlet cannot be aimed at garment folds or irregular material loads.The spherical eyeball provides directional adjustment during air-shower balancing.

An incorrect flange diameter leaves exposed cutouts in the cabinet panel.The mounting flange and hole pitch can be matched to the existing panel opening.

Rough internal edges create noise and an uneven discharge pattern.A smooth machined outlet supports a focused and repeatable air jet.

Corroded or difficult-to-clean outlets compromise the chamber interior.Satin stainless-steel construction provides a durable wipe-clean exposed surface.

Permohonan yang biasa

Personnel air shower walls and ceilingsMaterial air shower chambersCleanroom pass-through air showersReplacement nozzle upgrades and refurbishment

Parameter teknikal

Typical construction and dimensional ranges for adjustable air shower jet nozzles are shown below.

Bahan Teras	304 stainless-steel flange, spherical eyeball and discharge tube
Ketebalan Panel	20-100 mm compatible air-shower wall or ceiling assembly
Lebar berkesan	60-120 mm nominal mounting-flange diameter
Panjang maksimum	Up to 110 mm overall nozzle depth
Keluli Menghadapi Ketebalan	1.0-2.0 mm nominal formed or machined stainless-steel section
Ketumpatan teras	7900-8000 kg/m³ for stainless-steel components
Kekonduksian Terma	14-16 W / (m · K) untuk keluli tahan karat austenit
Kemasan permukaan	Fine satin-brushed natural stainless steel with smooth outlet bore
Jenis Bersatu	Adjustable spherical eyeball retained in a four-hole circular mounting flange
Penyesuaian	Boleh didapati berdasarkan aplikasi yang dimaksudkan dan persekitaran operasi.

Pilihan yang boleh didapati

Alternative flange diametersMatched outlet bore sizesCustom mounting-hole pitch304 or 316 stainless-steel construction

Planning a Air Shower Nozzle specification?

Hantarkan kepada kami dimensi anda, syarat pemasangan, sasaran prestasi dan kemasan permukaan yang diperlukan.

Berbincang dengan pasukan kami