Three-quarter view of an adjustable stainless steel air shower nozzle

클린룸 장비 예비 부품

공기 샤워 노즐

An adjustable stainless steel jet nozzle that directs high-velocity filtered air across garments, components and packaged materials inside an air shower.

Directional Ball Joint
Satin Stainless Steel
Four-Hole Mounting Flange
Focused Air Jet

견적 요청 제품 찾아보기

상품 소개

The air shower nozzle converts plenum airflow into a focused cleaning jet and allows its discharge direction to be set during commissioning. Its spherical eyeball rotates within a circular retaining flange, while a short smooth outlet limits unnecessary turbulence. Satin stainless-steel construction suits repeated cleaning and visually matches common air-shower interiors. Replacement work should verify flange diameter, mounting-hole pitch, outlet bore and available adjustment clearance.

주요 기능

The spherical center section pivots to aim the air jet toward the required cleaning zone.

A smooth circular outlet provides a defined discharge path without protruding vanes.

Four countersunk mounting holes distribute clamping around the round flange.

Satin stainless-steel surfaces provide durable, cleanable exposed hardware.

고객 제품 관심사

Nozzle geometry and aiming range determine whether filtered air reaches the intended surfaces without leaving sheltered zones.

A fixed outlet cannot be aimed at garment folds or irregular material loads.The spherical eyeball provides directional adjustment during air-shower balancing.

An incorrect flange diameter leaves exposed cutouts in the cabinet panel.The mounting flange and hole pitch can be matched to the existing panel opening.

Rough internal edges create noise and an uneven discharge pattern.A smooth machined outlet supports a focused and repeatable air jet.

Corroded or difficult-to-clean outlets compromise the chamber interior.Satin stainless-steel construction provides a durable wipe-clean exposed surface.

일반적인 응용 프로그램

Personnel air shower walls and ceilingsMaterial air shower chambersCleanroom pass-through air showersReplacement nozzle upgrades and refurbishment

기술 매개변수

Typical construction and dimensional ranges for adjustable air shower jet nozzles are shown below.

핵심 재료	304 stainless-steel flange, spherical eyeball and discharge tube
패널 두께	20-100 mm compatible air-shower wall or ceiling assembly
유효 폭	60-120 mm nominal mounting-flange diameter
최대 길이	Up to 110 mm overall nozzle depth
강철 면면 두께	1.0-2.0 mm nominal formed or machined stainless-steel section
코어 밀도	7900-8000 kg/m³ for stainless-steel components
열전도도 (Thermal Conductivity)	14 - 16 W / (m · K) 오스테나이트 스테인레스 스틸
표면 마무리	Fine satin-brushed natural stainless steel with smooth outlet bore
접합 유형	Adjustable spherical eyeball retained in a four-hole circular mounting flange
사용자 정의	의도된 응용 프로그램 및 운영 환경에 따라 사용할 수 있습니다.

사용 가능한 옵션

Alternative flange diametersMatched outlet bore sizesCustom mounting-hole pitch304 or 316 stainless-steel construction

Planning a Air Shower Nozzle specification?

치수, 설치 조건, 성능 목표 및 필요한 표면 마감을 보내십시오.

우리 팀과 대화하십시오.