Cleanroom Garments, PPE and Consumables

Nonwoven Cleanroom Wipes

Hydroentangled nonwoven cleanroom wipes offering practical sorbency, low linting and strong wet handling for routine controlled-area cleaning.

Hydroentangled fabric combines rapid sorption with dependable wet strength
Thin conformable sheets suit routine surface cleaning and spill pickup
Binder-free options help reduce transferable residue

Request a Quote Browse Products

Product Introduction

Nonwoven Cleanroom Wipes use entangled synthetic and cellulosic fibers to create a thin, conformable sheet without a woven or knitted yarn structure. The open fabric absorbs aqueous spills quickly, while polyester contributes strength during wet use. The wipe is intended for routine cleaning where balanced cleanliness, sorbency and economy are more important than the ultra-low particle performance of a fully knitted sealed-edge wipe.

Key Features

Hydroentangled construction provides strength without a heavy binder system

Polyester/cellulose blend offers rapid water and solvent sorption

Thin sheet folds easily around tools, corners and irregular surfaces

Fine apertured face assists removal of light residue

Cut-sheet format supports efficient high-frequency wipe replacement

Customer Product Concerns

Routine cleanroom cleaning consumes many wipes, yet low-cost tissue can tear, shed or leave binder residue. A suitable nonwoven must balance cleanliness with adequate liquid pickup and wet durability.

Paper tissue may disintegrate during wet wiping.Select a hydroentangled sheet with polyester reinforcement for wet strength.

High-cellulose materials can release visible lint into sensitive zones.Match the polyester/cellulose ratio and processing level to the controlled zone.

Added binders may transfer residue to the cleaned surface.Use a binder-free or low-additive construction for product-contact-adjacent cleaning.

Excessively heavy wipes can increase material and disposal volume.Choose basis weight and sheet size appropriate to the actual spill and surface area.

Typical Applications

Used for bench and cart wipe-down, light spill pickup, gowning-area cleaning, equipment exterior maintenance and solution application in electronics, laboratories, pharmaceutical support rooms and medical-device production.

Technical Parameters

These values represent common general-purpose nonwoven cleanroom wipes. Blend ratio, basis weight, sheet size and package cleanliness remain selectable for the facility's contamination-control program.

Core Material	Hydroentangled polyester/cellulose nonwoven blend
Panel Thickness	0.25–0.60 mm
Effective Width	100–310 mm
Maximum Length	310 mm
Steel Facing Thickness	0 mm; no steel facing used
Core Density	40–120 kg/m³ apparent sheet density
Thermal Conductivity	0.04–0.08 W/(m·K), blend dependent
Surface Finish	White fine-aperture low-lint nonwoven face
Joint Type	Clean cut sheet edge without stitched seam
Customization	Available based on the intended application and operating environment.

Available Options

Polyester/cellulose or 100% polyester substrateWhite or blue sheet colorQuarter-folded or flat-stacked presentationMultiple basis weightsDry or pre-saturated supplyStandard or double-bag cleanroom packaging

Planning a Nonwoven Cleanroom Wipes specification?

Send us your dimensions, installation conditions, performance targets and required surface finish.

Talk to Our Team