Anglais
Allemand
Arabe
FrançaisCurrent
Indonésien
Japonais
Coréen
Le malais
Le portugais
russe
espagnol
Thaïlandais
Le turc
Le vietnamien
Vêtements de salle blanche, EPI et consommables
Z Non tissé Cleanroom Wipes
Hydroentangled nonwoven cleanroom wipes offering practical sorbency, low linting and strong wet handling for routine controlled-area cleaning.
- Hydroentangled fabric combines rapid sorption with dependable wet strength
- Thin conformable sheets suit routine surface cleaning and spill pickup
- Binder-free options help reduce transferable residue
Introduction de produit
Nonwoven Cleanroom Wipes use entangled synthetic and cellulosic fibers to create a thin, conformable sheet without a woven or knitted yarn structure. The open fabric absorbs aqueous spills quickly, while polyester contributes strength during wet use. The wipe is intended for routine cleaning where balanced cleanliness, sorbency and economy are more important than the ultra-low particle performance of a fully knitted sealed-edge wipe.
Key Features
Polyester/cellulose blend offers rapid water and solvent sorption
Thin sheet folds easily around tools, corners and irregular surfaces
Fine apertured face assists removal of light residue
Cut-sheet format supports efficient high-frequency wipe replacement
Préoccupations du client produit
Routine cleanroom cleaning consumes many wipes, yet low-cost tissue can tear, shed or leave binder residue. A suitable nonwoven must balance cleanliness with adequate liquid pickup and wet durability.
Paper tissue may disintegrate during wet wiping.Select a hydroentangled sheet with polyester reinforcement for wet strength.
High-cellulose materials can release visible lint into sensitive zones.Match the polyester/cellulose ratio and processing level to the controlled zone.
Added binders may transfer residue to the cleaned surface.Use a binder-free or low-additive construction for product-contact-adjacent cleaning.
Excessively heavy wipes can increase material and disposal volume.Choose basis weight and sheet size appropriate to the actual spill and surface area.
Les applications typiques
Used for bench and cart wipe-down, light spill pickup, gowning-area cleaning, equipment exterior maintenance and solution application in electronics, laboratories, pharmaceutical support rooms and medical-device production.
Paramètres techniques
These values represent common general-purpose nonwoven cleanroom wipes. Blend ratio, basis weight, sheet size and package cleanliness remain selectable for the facility's contamination-control program.
| Matériaux de base | Hydroentangled polyester/cellulose nonwoven blend |
|---|---|
| Panneau épaisseur | 0.25–0.60 mm |
| Largeur effective | 100–310 mm |
| Longueur maximale | 310 mm |
| Acier face épaisseur | 0 mm; no steel facing used |
| Densité Core | 40–120 kg/m³ apparent sheet density |
| Conductivité thermique | 0.04–0.08 W/(m·K), blend dependent |
| surface finie | White fine-aperture low-lint nonwoven face |
| Type joint | Clean cut sheet edge without stitched seam |
| Customisation | Disponible en fonction de l'application prévue et de l'environnement d'exploitation. |
Options disponibles
Polyester/cellulose or 100% polyester substrateWhite or blue sheet colorQuarter-folded or flat-stacked presentationMultiple basis weightsDry or pre-saturated supplyStandard or double-bag cleanroom packaging
Planning a Nonwoven Cleanroom Wipes specification?
Envoyez-nous vos dimensions, conditions d'installation, objectifs de performance et finition de surface requise.
