EnglishCurrent
德语
阿拉伯语
法语
印尼语
日语
韩语
马来语
葡萄牙语
俄语
西班牙语
泰语
土耳其语
越南语
Cleanroom Cleaning, Disinfection and Sterilization
ESD Cleanroom Vacuum Cleaner
An ESD-control cleanroom vacuum with bonded conductive components, static-dissipative tools and high-efficiency exhaust filtration for sensitive electronics and precision manufacturing areas.
- Bonded conductive pickup path
- Dedicated grounding connection
- Sealed high-efficiency filtration
Product Introduction
The ESD Cleanroom Vacuum Cleaner combines particulate recovery with a continuous static-control path. Its stainless-steel collection body, conductive hose, metal wand, dissipative wheels and grounding connection help prevent charge accumulation while cleaning around exposed devices and production tools. A gasketed downstream HEPA or optional ULPA stage controls fine exhaust particles. The compact mobile layout supports routine dry cleaning beneath benches, inside equipment service zones and across controlled-environment floors.
Key Features
Dedicated grounding lead provides a verifiable discharge path.
Static-dissipative casters support movement across ESD-controlled floors.
Sealed HEPA exhaust stage limits redistribution of fine particles.
Stainless-steel exterior withstands repeated controlled-area wipe-downs.
Closable liner option reduces dust release during disposal.
Customer Product Concerns
The design addresses static accumulation, exhaust particles, accessory continuity and contained dust disposal.
Static charge during cleaningBonded conductive components and a grounding lead provide a controlled discharge route.
Particle release from exhaustA gasketed high-efficiency final filter treats motor exhaust before discharge.
Loss of continuity through accessoriesConductive hose, wand and tools maintain the static path from pickup point to body.
Dust exposure at disposalA sealable static-dissipative liner option contains collected dry material.
Typical Applications
Semiconductor fabrication and electronics assemblyESD-protected device packaging areasPrecision optics and sensor manufacturingControlled laboratories handling static-sensitive componentsDry housekeeping around process tools and grounded benches
Technical Parameters
The following specification represents a configurable ESD-control vacuum for sensitive production environments.
| Core Material | Type 304 stainless-steel body with conductive polymer components |
|---|---|
| Panel Thickness | 0.9–1.2 mm enclosure sheet thickness |
| Effective Width | 430 mm nominal body width |
| Maximum Length | 520 mm nominal body length, excluding hose |
| Steel Facing Thickness | 1.0 mm nominal stainless-steel wall |
| Core Density | 7900 kg/m³ nominal stainless-steel density |
| Thermal Conductivity | 15 W/(m·K) nominal for stainless-steel body material |
| Surface Finish | Brushed stainless steel with black static-dissipative trim |
| Joint Type | Bonded conductive couplings with gasketed clamp-fit canister |
| Customization | Available based on the intended application and operating environment. |
Available Options
H13/H14 HEPA or U15 ULPA final filtrationConductive floor, crevice and brush tool setsStatic-dissipative collection linerResistance-monitoring point or grounding lead configurationRegional voltage and plug selection
Planning a ESD Cleanroom Vacuum Cleaner specification?
Send us your dimensions, installation conditions, performance targets and required surface finish.
