영어
독일어
아랍어
프랑스어
인도네시아어
일본어
한국어현재 Current
말레이어
포르투갈어
러시아어
스페인어
태국어
터키어
베트남어
클린룸 청소, 소독 및 소독
ESD 클린룸 진공 청소기
An ESD-control cleanroom vacuum with bonded conductive components, static-dissipative tools and high-efficiency exhaust filtration for sensitive electronics and precision manufacturing areas.
- Bonded conductive pickup path
- Dedicated grounding connection
- Sealed high-efficiency filtration
상품 소개
The ESD Cleanroom Vacuum Cleaner combines particulate recovery with a continuous static-control path. Its stainless-steel collection body, conductive hose, metal wand, dissipative wheels and grounding connection help prevent charge accumulation while cleaning around exposed devices and production tools. A gasketed downstream HEPA or optional ULPA stage controls fine exhaust particles. The compact mobile layout supports routine dry cleaning beneath benches, inside equipment service zones and across controlled-environment floors.
주요 기능
Dedicated grounding lead provides a verifiable discharge path.
Static-dissipative casters support movement across ESD-controlled floors.
Sealed HEPA exhaust stage limits redistribution of fine particles.
Stainless-steel exterior withstands repeated controlled-area wipe-downs.
Closable liner option reduces dust release during disposal.
고객 제품 관심사
The design addresses static accumulation, exhaust particles, accessory continuity and contained dust disposal.
Static charge during cleaningBonded conductive components and a grounding lead provide a controlled discharge route.
Particle release from exhaustA gasketed high-efficiency final filter treats motor exhaust before discharge.
Loss of continuity through accessoriesConductive hose, wand and tools maintain the static path from pickup point to body.
Dust exposure at disposalA sealable static-dissipative liner option contains collected dry material.
일반적인 응용 프로그램
Semiconductor fabrication and electronics assemblyESD-protected device packaging areasPrecision optics and sensor manufacturingControlled laboratories handling static-sensitive componentsDry housekeeping around process tools and grounded benches
기술 매개변수
The following specification represents a configurable ESD-control vacuum for sensitive production environments.
| 핵심 재료 | Type 304 stainless-steel body with conductive polymer components |
|---|---|
| 패널 두께 | 케이스 시트 두께 0. 9 - 1. 2 mm |
| 유효 폭 | 430 mm nominal body width |
| 최대 길이 | 520 mm nominal body length, excluding hose |
| 강철 면면 두께 | 1.0 mm nominal stainless-steel wall |
| 코어 밀도 | 7900 kg / m 3 명칭 스테인레스 강철 밀도 |
| 열전도도 (Thermal Conductivity) | 스테인레스 스틸 바디 소재용 15 W / (m · K) 명칭 |
| 표면 마무리 | Brushed stainless steel with black static-dissipative trim |
| 접합 유형 | Bonded conductive couplings with gasketed clamp-fit canister |
| 사용자 정의 | 의도된 응용 프로그램 및 운영 환경에 따라 사용할 수 있습니다. |
사용 가능한 옵션
H13/H14 HEPA or U15 ULPA final filtrationConductive floor, crevice and brush tool setsStatic-dissipative collection linerResistance-monitoring point or grounding lead configurationRegional voltage and plug selection
Planning a ESD Cleanroom Vacuum Cleaner specification?
치수, 설치 조건, 성능 목표 및 필요한 표면 마감을 보내십시오.
