EnglishCurrent
德语
阿拉伯语
法语
印尼语
日语
韩语
马来语
葡萄牙语
俄语
西班牙语
泰语
土耳其语
越南语
Cleanroom Cleaning, Disinfection and Sterilization
Cleanroom Tacky Roller
Peel-off cleanroom tacky roller with a resilient polyethylene-foam surface and water-based acrylic adhesive for dry particle pickup from broad or textured surfaces.
- Peel-away sheets expose fresh tack
- Foam face follows textured surfaces
- Extension-handle compatible widths
Product Introduction
The Cleanroom Tacky Roller carries multiple perforated sheets of polyethylene film and compliant foam coated with a controlled water-based acrylic adhesive. Rolling pressure brings the tacky face into contact with particles across panels, floors or benches; once loaded, the outer sheet peels away at its perforation to reveal a clean working layer. A smooth polymer core slides onto hand-held or extension frames without absorbent hardware.
Key Features
Resilient foam conforms to lightly textured surfaces.
Water-based acrylic tack captures dry particulate.
Perforations define clean and predictable sheet removal.
Multiple widths suit benches, panels and floor zones.
Reusable handle keeps hands away from the working surface.
Customer Product Concerns
The roller addresses loose particles where wet cleaning is unsuitable, loss of tack during use and poor contact on uneven surfaces.
Declining pickupThe contaminated outer sheet peels away to expose fresh adhesive.
Uneven contactCompliant foam follows shallow surface texture.
Wet-process restrictionsPressure-sensitive tack removes dry debris without cleaning liquid.
Difficult changeoverThe refill core slides off the reusable axle without complex tools.
Typical Applications
Dry cleanroom floor particle pickupWall and panel surface preparationElectronics assembly benchesTextured equipment coversControlled packaging areas
Technical Parameters
The specifications describe common perforated foam-laminate tacky rollers used for controlled-area dry particle removal.
| Core Material | Polyethylene film and foam laminate with acrylic adhesive |
|---|---|
| Panel Thickness | 1.5-3.0 mm foam laminate thickness |
| Effective Width | 100-460 mm roller width |
| Maximum Length | 3650 mm with optional extension handle |
| Steel Facing Thickness | 1.0 mm nominal stainless handle bracket thickness |
| Core Density | 25-45 kg/m³ polyethylene foam density |
| Thermal Conductivity | 0.033-0.045 W/(m·K) nominal polyethylene foam range |
| Surface Finish | Smooth blue peel-off tacky film |
| Joint Type | Slide-on refill core with removable axle and perforated sheets |
| Customization | Available based on the intended application and operating environment. |
Available Options
100, 230, 300 or 460 mm widthPolyethylene foam or polyurethane faceHand frame or telescopic extension handleLow, medium or high tack levelBlue, white or transparent peel-off film
Planning a Cleanroom Tacky Roller specification?
Send us your dimensions, installation conditions, performance targets and required surface finish.
