Inglês
Alemão
Língua árabe
Francês
Língua indonésia
Japonês
Coreano
Língua malaia
Portuguêsatual
Língua russa
Espanhol
Tailandês
Língua turca
Vietnã
Limpeza, desinfecção e esterilização da sala limpa
Z Cleanroom Tacky Roller (em inglês)
Peel-off cleanroom tacky roller with a resilient polyethylene-foam surface and water-based acrylic adhesive for dry particle pickup from broad or textured surfaces.
- Peel-away sheets expose fresh tack
- Foam face follows textured surfaces
- Extension-handle compatible widths
Introdução do produto
The Cleanroom Tacky Roller carries multiple perforated sheets of polyethylene film and compliant foam coated with a controlled water-based acrylic adhesive. Rolling pressure brings the tacky face into contact with particles across panels, floors or benches; once loaded, the outer sheet peels away at its perforation to reveal a clean working layer. A smooth polymer core slides onto hand-held or extension frames without absorbent hardware.
Características-chave
Resilient foam conforms to lightly textured surfaces.
Water-based acrylic tack captures dry particulate.
Perforations define clean and predictable sheet removal.
Multiple widths suit benches, panels and floor zones.
Reusable handle keeps hands away from the working surface.
Preocupações do produto do cliente
The roller addresses loose particles where wet cleaning is unsuitable, loss of tack during use and poor contact on uneven surfaces.
Declining pickupThe contaminated outer sheet peels away to expose fresh adhesive.
Uneven contactCompliant foam follows shallow surface texture.
Wet-process restrictionsPressure-sensitive tack removes dry debris without cleaning liquid.
Difficult changeoverThe refill core slides off the reusable axle without complex tools.
Aplicações típicas
Dry cleanroom floor particle pickupWall and panel surface preparationElectronics assembly benchesTextured equipment coversControlled packaging areas
Parâmetros técnicos
The specifications describe common perforated foam-laminate tacky rollers used for controlled-area dry particle removal.
| Material principal | Polyethylene film and foam laminate with acrylic adhesive |
|---|---|
| Painel de espessura | 1.5-3.0 mm foam laminate thickness |
| Largura efetiva | 100-460 mm roller width |
| Comprimento máximo | 3650 mm with optional extension handle |
| Aço enfrentando espessura | 1.0 mm nominal stainless handle bracket thickness |
| Densidade Core | 25-45 kg/m³ polyethylene foam density |
| Condutividade térmica | 0.033-0.045 W/(m·K) nominal polyethylene foam range |
| Superfície acabado | Smooth blue peel-off tacky film |
| Tipo conjunto | Slide-on refill core with removable axle and perforated sheets |
| Customização | Disponível com base na aplicação pretendida e no ambiente operacional. |
Opções disponíveis
100, 230, 300 or 460 mm widthPolyethylene foam or polyurethane faceHand frame or telescopic extension handleLow, medium or high tack levelBlue, white or transparent peel-off film
Planning a Cleanroom Tacky Roller specification?
Envie-nos as suas dimensões, condições de instalação, metas de desempenho e acabamento de superfície necessário.
