EnglishCurrent
德语
阿拉伯语
法语
印尼语
日语
韩语
马来语
葡萄牙语
俄语
西班牙语
泰语
土耳其语
越南语
Cleanroom Material Handling and Storage
Cleanroom Hand Cart
A compact stainless steel two-wheel hand cart for upright handling of cartons, pails and packaged supplies in controlled environments.
- Narrow upright stainless frame for compact cleanroom routes
- Low toe plate and cross rails for cartons, pails and packages
- Large non-marking wheels with optional load-retaining straps
Product Introduction
The cleanroom hand cart uses an open tubular stainless frame, a low toe plate and non-marking wheels to transfer manageable loads without introducing painted or porous external surfaces. Its narrow upright form is suited to corridors and storage points where a platform cart would occupy excessive floor space.
Key Features
Low toe plate slides beneath cartons and containers.
Large non-marking wheels roll over normal floor transitions.
Cross rails support varied package heights.
Upright parking footprint conserves storage space.
Customer Product Concerns
Upright loads must pass through restricted routes without painted-frame shedding, floor marking or loss of package support while the cart is tilted.
Paint flakes or corroded surfacesStainless external construction eliminates painted-frame shedding.
Wheel marksNon-marking polyurethane wheel options protect clean floor finishes.
Bulky storageThe upright two-wheel design uses limited floor area.
Unstable packagesCross rails and optional retaining straps support different load shapes.
Typical Applications
For moving cartons, small drums, pails and packaged process supplies in laboratories, pharmaceutical production, food facilities and clean manufacturing support areas.
Technical Parameters
Toe-plate depth, frame height, wheel diameter and compound, and optional strap or drum supports can be configured for the container profile and travel route.
| Core Material | Type 304 stainless steel tubular frame and toe plate |
|---|---|
| Panel Thickness | 2.0–3.0 mm toe plate |
| Effective Width | 450–610 mm |
| Maximum Length | Up to 600 mm base depth |
| Steel Facing Thickness | 1.5–2.0 mm frame wall equivalent |
| Core Density | 7930 kg/m³ nominal stainless steel density |
| Thermal Conductivity | Approximately 16.2 W/(m·K) at room temperature |
| Surface Finish | Brushed or electropolished stainless steel |
| Joint Type | Continuously welded tubular frame with welded toe plate |
| Customization | Available based on the intended application and operating environment. |
Available Options
304 or 316 stainless steel, alternate toe-plate sizes, curved drum supports, retaining straps, conductive wheels and custom frame heights are available.
Planning a Cleanroom Hand Cart specification?
Send us your dimensions, installation conditions, performance targets and required surface finish.
