Cleanroom hand cart in a complete three-quarter stainless steel view

클린룸 재료 취급 및 보관

클린룸 핸드 카트

A compact stainless steel two-wheel hand cart for upright handling of cartons, pails and packaged supplies in controlled environments.

Narrow upright stainless frame for compact cleanroom routes
Low toe plate and cross rails for cartons, pails and packages
Large non-marking wheels with optional load-retaining straps

견적 요청 제품 찾아보기

상품 소개

The cleanroom hand cart uses an open tubular stainless frame, a low toe plate and non-marking wheels to transfer manageable loads without introducing painted or porous external surfaces. Its narrow upright form is suited to corridors and storage points where a platform cart would occupy excessive floor space.

주요 기능

Stainless tubular frame presents accessible wipe-down surfaces.

Low toe plate slides beneath cartons and containers.

Large non-marking wheels roll over normal floor transitions.

Cross rails support varied package heights.

Upright parking footprint conserves storage space.

고객 제품 관심사

Upright loads must pass through restricted routes without painted-frame shedding, floor marking or loss of package support while the cart is tilted.

Paint flakes or corroded surfacesStainless external construction eliminates painted-frame shedding.

Wheel marksNon-marking polyurethane wheel options protect clean floor finishes.

Bulky storageThe upright two-wheel design uses limited floor area.

Unstable packagesCross rails and optional retaining straps support different load shapes.

일반적인 응용 프로그램

For moving cartons, small drums, pails and packaged process supplies in laboratories, pharmaceutical production, food facilities and clean manufacturing support areas.

기술 매개변수

Toe-plate depth, frame height, wheel diameter and compound, and optional strap or drum supports can be configured for the container profile and travel route.

핵심 재료	Type 304 stainless steel tubular frame and toe plate
패널 두께	2.0–3.0 mm toe plate
유효 폭	450–610 mm
최대 길이	Up to 600 mm base depth
강철 면면 두께	1.5–2.0 mm frame wall equivalent
코어 밀도	7930 kg / m 3 공칭 스테인레스 강철 밀도
열전도도 (Thermal Conductivity)	실온에서 약 16. 2 W / (m · K)
표면 마무리	브러시 또는 전기 연마 스테인레스 스틸
접합 유형	Continuously welded tubular frame with welded toe plate
사용자 정의	의도된 응용 프로그램 및 운영 환경에 따라 사용할 수 있습니다.

사용 가능한 옵션

304 or 316 stainless steel, alternate toe-plate sizes, curved drum supports, retaining straps, conductive wheels and custom frame heights are available.

Planning a Cleanroom Hand Cart specification?

치수, 설치 조건, 성능 목표 및 필요한 표면 마감을 보내십시오.

우리 팀과 대화하십시오.