EnglishCurrent
德语
阿拉伯语
法语
印尼语
日语
韩语
马来语
葡萄牙语
俄语
西班牙语
泰语
土耳其语
越南语
Cleanroom Garments, PPE and Consumables
Cleanroom Face Mask
A low-lint pleated cleanroom face mask with a polyethylene outer layer, soft inner facing and adjustable nosepiece.
- Low-lint polyethylene outer layer
- Pleated coverage with enclosed nosepiece
- Earloops or soft-tie configurations
Product Introduction
The Cleanroom Face Mask uses a pleated rectangular body to cover the nose and mouth while limiting fiber release toward the controlled workspace. A smooth white polyethylene outer layer faces the process, a soft inner layer supports wearer comfort, and an enclosed bendable nosepiece helps reduce gaps across the bridge. Earloops or ultrasonically bonded ties can be selected for the gowning method.
Key Features
Expandable pleats increase nose-to-chin coverage
Fully enclosed flexible nose strip supports facial adjustment
Soft inner-facing layer manages direct skin contact
Choice of knitted earloops or soft ties
Customer Product Concerns
A cleanroom mask must remain stable without creating exposed fibers or large facial gaps. Width, nose adjustment and fastening style affect both coverage and compatibility with hoods and eyewear.
Gaps beside the nose can direct exhaled air toward eyewear.Use a soft enclosed nosepiece and form it evenly across the bridge.
A narrow mask may lose chin coverage during speaking.Select 180 or 230 mm width according to facial coverage needs.
Conventional paper-like outer layers may shed toward the process.Specify a smooth low-lint polyethylene outer layer.
Earloop tension may conflict with long-duration gowning.Choose knitted earloops or soft ties to match hood and comfort requirements.
Typical Applications
Suitable for pharmaceutical production, biotechnology laboratories, medical-device assembly, semiconductor support areas, clean packing and other controlled tasks requiring mouth-and-nose coverage.
Technical Parameters
These configurable values describe a non-sterile cleanroom face mask. Final filtration and processing requirements must be selected for the actual controlled-environment program.
| Core Material | Polypropylene or polyester filter layer with polyethylene outer film |
|---|---|
| Panel Thickness | 0.8–1.8 mm uncompressed |
| Effective Width | 180–230 mm |
| Maximum Length | 230 mm mask body width |
| Steel Facing Thickness | 0 mm; no steel facing used |
| Core Density | 70–140 kg/m³ apparent multilayer bulk density |
| Thermal Conductivity | 0.035–0.060 W/(m·K), material dependent |
| Surface Finish | White low-lint pleated polyethylene outer with soft inner facing |
| Joint Type | Ultrasonically bonded perimeter with enclosed nosepiece and earloops or ties |
| Customization | Available based on the intended application and operating environment. |
Available Options
180 mm or 230 mm body widthKnitted earloops, soft ties or dual headbandsPolypropylene or polyester filter layerWhite or blue process-facing outer layerStandard or cleanroom-compatible packagingNon-sterile or separately specified sterile configuration
Planning a Cleanroom Face Mask specification?
Send us your dimensions, installation conditions, performance targets and required surface finish.
