EnglishCurrent
德语
阿拉伯语
法语
印尼语
日语
韩语
马来语
葡萄牙语
俄语
西班牙语
泰语
土耳其语
越南语
Cleanroom Garments, PPE and Consumables
Cleanroom Boots
Reusable knee-high cleanroom boots with white low-lint polyester uppers, elastic top openings, adjustable ankle straps and blue molded soles.
- Knee-high reusable polyester body extends controlled coverage
- Elastic top and adjustable ankle strap stabilize the fit
- Blue molded slip-resistant sole provides a durable walking surface
Product Introduction
Cleanroom Boots extend garment coverage from the foot to below the knee while providing a reusable sole for controlled-area movement. The white continuous-filament polyester upper uses bound seams and an elastic top to limit loose construction edges. An adjustable blue ankle strap controls excess volume, and the molded blue sole supplies a defined, cleanable walking surface.
Key Features
Elasticated top retains the upper edge without loose drawcords
Adjustable ankle strap reduces fabric movement around footwear
Bound seams contain cut fabric edges
Molded blue sole supports repeated controlled-area use
Customer Product Concerns
Reusable boots must remain upright, retain their shape and tolerate repeated cleaning. Poorly controlled shaft volume can sag, while weak sole attachment can shorten service life.
Tall shafts may slide down during walking.Use an elastic top sized to retain the calf without a loose cord.
Excess fabric can gather around the ankle.Add an adjustable ankle strap anchored at reinforced points.
Exposed seam edges can release fibers.Specify bound, twin-needle or heat-sealed cleanroom seams.
A flat fabric bottom may wear prematurely.Use a molded slip-resistant sole designed for repeated cleaning.
Typical Applications
Reusable footwear coverage for pharmaceutical production, biotechnology, medical-device manufacturing, semiconductor facilities, laboratories and controlled filling or processing areas.
Technical Parameters
These conservative ranges describe reusable knee-high cleanroom overboots. Fabric, sole compound and processing compatibility should be selected for the facility laundry and sterilization program.
| Core Material | Continuous-filament polyester upper with molded elastomer sole |
|---|---|
| Panel Thickness | 0.20–0.35 mm fabric body |
| Effective Width | 320–430 mm calf circumference by size |
| Maximum Length | 520 mm boot height |
| Steel Facing Thickness | 0 mm; no steel facing used |
| Core Density | 95–125 kg/m³ areal-mass equivalent fabric structure |
| Thermal Conductivity | 0.04–0.07 W/(m·K), assembly dependent |
| Surface Finish | White low-lint upper with blue textured slip-resistant sole |
| Joint Type | Bound panel seams, elastic top, adjustable ankle strap and molded sole |
| Customization | Available based on the intended application and operating environment. |
Available Options
Multiple shoe and calf sizesWhite or light-blue fabricFlat or molded cavity soleSnap or buckle ankle adjustmentConductive-tape ESD configurationClean-laundered or sterilization-compatible presentation
Planning a Cleanroom Boots specification?
Send us your dimensions, installation conditions, performance targets and required surface finish.
