English
الألمانية
العربيةالحالي
الفرنسية
الإندونيسية
اليابانية
الكورية
اللغة الملاوية
البرتغالية
الروسية
الإسبانية
التايلاندية
اللغة التركية
اللغة الفيتنامية
ملابس الغرف النظيفة، PPE والمواد الاستهلاكية
حذية غرفة نظيفة
Reusable knee-high cleanroom boots with white low-lint polyester uppers, elastic top openings, adjustable ankle straps and blue molded soles.
- Knee-high reusable polyester body extends controlled coverage
- Elastic top and adjustable ankle strap stabilize the fit
- Blue molded slip-resistant sole provides a durable walking surface
مقدمة المنتج
Cleanroom Boots extend garment coverage from the foot to below the knee while providing a reusable sole for controlled-area movement. The white continuous-filament polyester upper uses bound seams and an elastic top to limit loose construction edges. An adjustable blue ankle strap controls excess volume, and the molded blue sole supplies a defined, cleanable walking surface.
الخصائص الرئيسية
Elasticated top retains the upper edge without loose drawcords
Adjustable ankle strap reduces fabric movement around footwear
Bound seams contain cut fabric edges
Molded blue sole supports repeated controlled-area use
مخاوف المنتج للعملاء
Reusable boots must remain upright, retain their shape and tolerate repeated cleaning. Poorly controlled shaft volume can sag, while weak sole attachment can shorten service life.
Tall shafts may slide down during walking.Use an elastic top sized to retain the calf without a loose cord.
Excess fabric can gather around the ankle.Add an adjustable ankle strap anchored at reinforced points.
Exposed seam edges can release fibers.Specify bound, twin-needle or heat-sealed cleanroom seams.
A flat fabric bottom may wear prematurely.Use a molded slip-resistant sole designed for repeated cleaning.
تطبيقات نموذجية
Reusable footwear coverage for pharmaceutical production, biotechnology, medical-device manufacturing, semiconductor facilities, laboratories and controlled filling or processing areas.
المعلمات الفنية
These conservative ranges describe reusable knee-high cleanroom overboots. Fabric, sole compound and processing compatibility should be selected for the facility laundry and sterilization program.
| المواد الأساسية | Continuous-filament polyester upper with molded elastomer sole |
|---|---|
| سمك اللوحة | 0.20–0.35 mm fabric body |
| العرض الفعال | 320–430 mm calf circumference by size |
| الحد الأقصى الطول | 520 mm boot height |
| الصلب يواجه سمك | 0 mm; no steel facing used |
| الكثافة الأساسية | 95–125 kg/m³ areal-mass equivalent fabric structure |
| الموصلية الحرارية | 0.04–0.07 W/(m·K), assembly dependent |
| إنهاء السطح | White low-lint upper with blue textured slip-resistant sole |
| نوع المشترك | Bound panel seams, elastic top, adjustable ankle strap and molded sole |
| التخصيص | متوفر على أساس التطبيق المقصود وبيئة التشغيل. |
الخيارات المتاحة
Multiple shoe and calf sizesWhite or light-blue fabricFlat or molded cavity soleSnap or buckle ankle adjustmentConductive-tape ESD configurationClean-laundered or sterilization-compatible presentation
Planning a Cleanroom Boots specification?
أرسل لنا الأبعاد الخاصة بك، شروط التثبيت، أهداف الأداء والتشطيب السطحي المطلوب.
