Cleanroom Garments, PPE and Consumables

Cleanroom Balaclava Hood

A low-lint balaclava-style cleanroom hood with an elasticated face aperture and extended cape for secure gown overlap.

Elasticated oval face opening
Cape-style shoulder and neck coverage
Low-lint bound-seam construction

Request a Quote Browse Products

Product Introduction

The Cleanroom Balaclava Hood combines close head coverage with a flexible oval facial opening and an extended cape around the neck and shoulders. Unlike an eyes-only hood, its elasticated aperture is designed to frame the face while remaining compatible with a separately selected mask and eye protection. Bound seams and a smooth low-lint shell help manage garment-edge exposure in controlled cleaning and preparation work.

Key Features

Balaclava profile surrounds the face with a continuous elasticated edge

Cape-style bib extends across the shoulders for garment overlap

Bound crown and cape seams cover raw material edges

Lightweight white material provides visible contrast for cleanliness checks

One-size geometry supports straightforward stock control

Customer Product Concerns

Balaclava hoods must retain their position when the wearer turns the head, while leaving enough space for approved masks and eyewear. An unstable aperture or short cape can compromise gown overlap.

The facial aperture may widen or migrate during movement.Use a softly elasticated oval opening with consistent edge recovery.

Separate mask straps can interfere with the hood edge.Confirm mask and eyewear compatibility during gowning-system selection.

The cape may bunch or pull free at the garment neckline.Specify an extended cape with balanced front, side and rear overlap.

Exposed seam edges may shed near the controlled task.Select bound seam construction and clean packaging suited to the work zone.

Typical Applications

Suitable for cleanroom cleaning and preparation, pharmaceutical support areas, controlled laboratories, medical-device processing and other gowning programs that use separate face masks and eye protection.

Technical Parameters

These configurable values describe a separate balaclava-style cape hood. Final aperture dimensions and material must be matched to the complete facial PPE and outer garment system.

Core Material	Microporous polyethylene film laminated to nonwoven polypropylene
Panel Thickness	0.16–0.28 mm
Effective Width	500–620 mm when laid flat
Maximum Length	520 mm
Steel Facing Thickness	0 mm; no steel facing used
Core Density	65–105 kg/m³ apparent material bulk density
Thermal Conductivity	0.035–0.060 W/(m·K), material dependent
Surface Finish	Smooth low-lint white outer surface with elasticated facial edge
Joint Type	Bound crown and cape seams with enclosed elastic face opening
Customization	Available based on the intended application and operating environment.

Available Options

Microporous laminate or flash-spun polyethylene shellElasticated open-face or fixed bound apertureStandard or extended cape lengthSterile or non-sterile configurationClean-processed individual packagingWhite or application-specific light color

Planning a Cleanroom Balaclava Hood specification?

Send us your dimensions, installation conditions, performance targets and required surface finish.

Talk to Our Team