Bahasa Inggris
Bahasa Jerman
Bahasa Arab
Bahasa Perancis: Bahasa Perancis
Bahasa IndonesiaSaat ini
Bahasa Jepang
Bahasa Korea
Bahasa Melayu
Bahasa Portugis
Bahasa Rusia
Bahasa Spanyol
Bahasa Thailand
Bahasa Turki
Bahasa Vietnam
Penanganan dan Penyimpanan Bahan Cleanroom
Wafer Transportation Cart Wafer Transportasi Cart Wafer Transportasi Cart Wafer
An electropolished stainless wafer transport cart with two perforated retained shelves, round-tube frame, integrated push handle, cleanroom casters and grounding chain.
- Angled perforated shelves keep wafer boxes seated against retaining rails
- Electropolished round-tube frame minimizes ledges and square-profile corners
- Cleanroom casters and grounding provision support sensitive semiconductor transfer
Perkenalan produk
The wafer transport cart is configured for manual movement of closed wafer boxes and lot carriers between semiconductor work areas. Two perforated shelves allow vertical airflow and are inclined slightly toward the rear so carriers rest against the retention rails rather than the aisle edge. Rounded stainless posts and an integrated handle create an accessible wipe-down path, while polyurethane casters provide controlled mobility on finished cleanroom floors.
Fitur utama:
Perforations reduce broad horizontal particle-collection surfaces.
Three-sided shelf rails resist carrier migration during starts and turns.
Round stainless tubing presents fewer sharp ledges than open structural angles.
Grounding and cleanroom-caster options address static and vibration concerns.
Kekhawatiran produk pelanggan
Ordinary utility carts allow carriers to slide, create particle-catching shelf surfaces and transmit floor shock directly into fragile wafer loads.
Carrier movement during turnsSlightly angled shelves and raised rails retain boxes within the deck perimeter.
Particle accumulationPerforated panels and rounded tubes expose easier cleaning paths and support airflow.
Wheel shock reaching wafersSelected polyurethane or spring-loaded casters reduce harsh rolling input.
Electrostatic charge on the frameConductive caster and grounding-chain options provide a defined dissipation path.
Aplikasi yang Tipis
Manual transport of 150 mm, 200 mm or 300 mm wafer boxes, lot boxes and protected wafer carriers between stockers, inspection stations, wet-process support areas and metrology cells.
Parameter teknis
Shelf plan, retaining-rail height and rearward angle are selected around the target wafer-box footprint and handling method. The welded frame transfers shelf loads directly to four corner posts and stem-mounted swivel casters. Electropolishing smooths exposed stainless surfaces; conductive wheel compounds, grounding chain and spring-loaded caster assemblies can be added where electrostatic and shock control are required.
| Bahan inti | 304 or 316L stainless steel frame and shelves with cleanroom-compatible polyurethane casters |
|---|---|
| Ketebalan Panel (Panel Thickness) | 1.2–2.0 mm perforated shelf panels |
| Efektif lebar | 365–1350 mm usable shelf width |
| Panjang maksimum | Up to 1420 mm overall cart length |
| Baja menghadap ketebalan | 1.2–2.0 mm exposed stainless shelf surfaces |
| Kepadatan inti (core density) | 7900–8000 kg/m³ nominal stainless steel density |
| Konduktivitas Termal (Thermal Conductivity) | Sekitar 14,6 - 16,2 W / (m · K) pada suhu kamar |
| Permukaan selesai | Electropolished or fine mechanically polished stainless steel |
| Jenis Bersama | Continuously welded round-tube frame with retained perforated shelves and stem-mounted swivel casters |
| Customization (Kustomisasi) | Tersedia berdasarkan aplikasi yang dimaksudkan dan lingkungan operasi. |
Pilihan yang tersedia
304 or 316L stainless steel, shelf geometry for 150 mm, 200 mm or 300 mm carriers, alternative shelf count, electropolished finish, spring-loaded casters, conductive wheels, grounding chain, removable carrier dividers and parking brakes.
Planning a Wafer Transport Cart specification?
Kirimkan kami dimensi Anda, kondisi instalasi, target kinerja dan permukaan akhir yang diperlukan.
