Open-front pharmaceutical weighing booth with stainless internal work zone

Équipement d'écoulement et de confinement laminaires

Pharmaceutique pesant booth par

A cleanable downflow booth that controls airborne powder around balances, containers and routine pharmaceutical weighing operations.

Low-Turbulence Downflow
Low-Level Powder Return
Balance-Ready Work Zone
Safe-Change Filter Option

Demander un devis. Browse les produits

Introduction de produit

The weighing booth creates a controlled open-front work zone around balances and powder containers. Filtered supply air moves downward from the ceiling, captures airborne material and returns through low rear grilles before staged filtration. The weighing table is isolated from fan vibration and positioned away from strong return velocity to protect measurement stability. Stainless internal panels, flush lighting and accessible filter service points support routine cleaning and maintenance.

Key Features

Uniform ceiling downflow moves released powder away from the operator's breathing zone.

Low rear return grilles collect dust close to the work surface and floor.

An independently supported balance table reduces blower and floor vibration.

Flush internal lights and controls avoid protrusions around the powder-handling area.

Safe-change filter housings can contain loaded prefilters and final filters during service.

Préoccupations du client produit

Routine weighing requires both powder capture and a stable balance environment; excessive air velocity or vibration can compromise measurement quality.

Fine powder rises toward the operator while containers are open.Ceiling downflow and low rear returns direct airborne material away from the breathing zone.

Fan vibration disturbs sensitive balance readings.A separate anti-vibration weighing table is structurally isolated from the booth enclosure.

Dust accumulates on exposed lights and ledges.Flush fittings and smooth stainless liners reduce horizontal collection surfaces.

Loaded filters expose maintenance staff during replacement.Optional safe-change bags or contained filter housings isolate the filter-removal path.

Les applications typiques

Raw-material weighingFormulation ingredient dispensingPowder subdivisionBatch sample preparation

Paramètres techniques

Typical configurable construction ranges for a pharmaceutical weighing booth are listed below.

Matériaux de base	Mineral-wool insulated cleanroom panels with SUS304 internal liners, return grilles and work surfaces
Panneau épaisseur	50-100 mm insulated booth panels
Largeur effective	1500-3500 mm clear working width
Longueur maximale	Up to 5000 mm booth depth
Acier face épaisseur	1.0-1.5 mm SUS304 internal facing; 0.8-1.2 mm coated outer facing
Densité Core	80-120 kg/m³ mineral-wool panel core
Conductivité thermique	0.035-0.045 W/(m·K) for the mineral-wool core
surface finie	Fine-brushed SUS304 work zone with low-sheen white external powder coating
Type joint	Flush sealed panel joints with welded return plenums and gasketed safe-change filter housings
Customisation	Disponible en fonction de l'application prévue et de l'environnement d'exploitation.

Options disponibles

Recirculating or once-through airflowSafe-change filter stagesIntegrated anti-vibration balance tableContainer lift and pallet stop rails

Planning a Pharmaceutical Weighing Booth specification?

Envoyez-nous vos dimensions, conditions d'installation, objectifs de performance et finition de surface requise.

Parlez à notre équipe