Englisch
DeutschCurrent
Arabisch
Französisch
indonesisch
Japanisch
Koreanisch
Malaiisch
Portugiesisch
Russisch
Spanisch
Thailändisch
Türkischer Sprache
Vietnamesisch
Luftfilter und chemische Filtration
Mini-Plate ULPA Filter
A shallow ultra-low-penetration air filter with densely spaced microglass mini-pleats for very high particle capture in semiconductor and precision cleanrooms.
- U15–U16 Media Options
- Dense Mini-Pleat Pack
- Shallow Aluminium Frame
- Uniform Terminal Airflow
Produkteinführung
The mini-pleat ULPA filter uses ultra-fine glass-microfibre media folded into a high-area pack with narrow thermoplastic separators. Precise pleat spacing allows the panel to achieve U15 or U16 class options while remaining shallow enough for cleanroom ceilings and fan filter units. The pack is fully potted into an anodized-aluminium frame, protected by expanded-metal grids and completed with gasket, gel or knife-edge sealing. Its high filtration class and even face velocity suit semiconductor, optics and other ultra-clean manufacturing zones.
Key Features
Uniform thermoplastic separators keep narrow airflow channels open across the whole media pack.
An anodized-aluminium frame and sealed corners provide a clean, rigid perimeter for ceiling installation.
Open protective grids shield the delicate ULPA media while preserving even downstream air distribution.
Kunden Produktbedenken
Ultra-clean processes require filtration beyond normal HEPA classes while maintaining manageable resistance and uniform terminal airflow.
A conventional HEPA filter does not provide the selected U-class particle retention.Ultra-fine microglass media and controlled mini-pleat manufacturing support U15 or U16 configurations.
Very dense media causes uneven velocity across a large terminal face.Precisely spaced pleat channels distribute air through the full filter area instead of concentrating flow paths.
The delicate high-efficiency pack is easily damaged during FFU installation.Protective grids and a rigid extruded-aluminium perimeter shield the pack from handling contact.
A deep filter reduces usable service space above the cleanroom ceiling.The high-area mini-pleat pack fits within common 80–150 mm shallow terminal frames.
Typische Anwendungen
Semiconductor wafer fabricationPrecision optics manufacturingFlat-panel display cleanroomsHard-disk media productionUltra-clean metrology laboratories
Technische Parameter
Representative construction ranges for mini-pleat ULPA panels are shown below.
| Core Material | Low-penetration glass-microfibre ULPA media with precisely spaced thermoplastic mini-pleat separators |
|---|---|
| Panel Dicke | 80–150 mm overall frame depth |
| Effektive Breite | 305 - 610 mm Nenngesichtbreite |
| Maximale Länge | Bis zu 1220 mm Nennfläche |
| Stahl facing Dicke | 0.4–0.6 mm powder-coated or stainless-steel expanded faceguard |
| Kerndichte | Approximately 35–55 kg/m³ equivalent mini-pleat media density |
| Thermische Leitfähigkeit | Approximately 0.035–0.045 W/(m·K) for the dry microglass ULPA pack |
| Oberfläche Finish | Natural anodized-aluminium frame with clean white or stainless faceguards |
| Gemeinsamer Typ | EPDM gasket, polyurethane gel channel or extruded knife-edge perimeter |
| Customisierung | Verfügbar je nach beabsichtigter Anwendung und Betriebsumgebung. |
Verfügbare Optionen
U15 or U16 efficiency class80 mm, 90 mm or 150 mm frame depthGasket, gel or knife-edge sealOne-sided or two-sided faceguard
Planning a Mini-Pleat ULPA Filter specification?
Senden Sie uns Ihre Abmessungen, Installationsbedingungen, Leistungsziele und gewünschte Oberflächenveredelung.
