Englisch
DeutschCurrent
Arabisch
Französisch
indonesisch
Japanisch
Koreanisch
Malaiisch
Portugiesisch
Russisch
Spanisch
Thailändisch
Türkischer Sprache
Vietnamesisch
Reinraum Wand - und Deckensysteme
Modulares Cleanroom Wall Panel
A demountable steel-faced wall module with a dense mineral wool core, engineered to create smooth, sealed cleanroom partitions that accept doors, glazing and service openings without wet construction.
- Flush Hygienic Surface
- Dense Mineral Wool Core
- Demountable Wall Modules
- Concealed Sealed Joints
Produkteinführung
The Modular Cleanroom Wall Panel combines pre-painted galvanized steel skins, a hydrophobic rock wool core and protected perimeter edges in one factory-built partition element. Its interlocking vertical edges produce a straight wall line with a narrow sealant recess rather than exposed fasteners. Head and floor channels hold each module securely while still allowing selected panels to be removed when a room is altered. Doors, windows and pass-throughs fit into matching profiles, giving the completed envelope a consistent flush appearance.
Key Features
Balanced bonded skins help the module retain a flat face through normal handling and installation.
Hidden connectors preserve an uninterrupted wiping surface along long partition runs.
Individual panels can be replaced without dismantling the entire wall sequence.
Compatible framing accepts flush windows, doors, covings and transfer equipment.
Kunden Produktbedenken
Wall-system buyers typically compare core containment, cleanability, layout flexibility and the quality of interfaces around openings.
Exposed insulation at panel ends can release fibres when the wall is modified.Closed metal perimeter profiles retain the rock wool even at removable module boundaries.
Proud fasteners and wide trims create ledges that interrupt routine wiping.Concealed connections and flush joint seals keep the room face smooth from panel to panel.
Fixed partitions make future equipment moves expensive and disruptive.Demountable modules open a controlled section of wall and can be reinstalled in a revised layout.
Mismatched door and window frames leave difficult transitions around openings.A shared profile family joins panels, glazing and doors on the same finished plane.
Typische Anwendungen
Pharmaceutical modular production partitionsModular partitions for medical-device assemblyBiotechnology cleanroom wall enclosuresElectronics production clean areasHygienic food packaging partitions
Technische Parameter
The following range represents a mineral-wool modular wall panel for typical cleanroom partition construction.
| Core Material | Hydrophobic rock wool with four-side metal edge closure |
|---|---|
| Panel Dicke | 50, 75 oder 100 mm |
| Effektive Breite | 980 or 1180 mm |
| Maximale Länge | 6000 mm |
| Stahl facing Dicke | 0,50 - 0,60 mm |
| Kerndichte | 100–120 kg/m³ |
| Thermische Leitfähigkeit | 0.035–0.040 W/(m·K) |
| Oberfläche Finish | Smooth PE- or PVDF-coated galvanized steel; stainless steel optional |
| Gemeinsamer Typ | Concealed tongue-and-groove joint with recessed cleanroom seal |
| Customisierung | Panel dimensions, facings and opening details can be tailored to the intended room use |
Verfügbare Optionen
PVDF-coated or stainless steel room faceFactory-framed door and glazing openingsVertical or horizontal panel orientationReinforced zones for wall-mounted accessories
Planning a Modular Cleanroom Wall Panel specification?
Senden Sie uns Ihre Abmessungen, Installationsbedingungen, Leistungsziele und gewünschte Oberflächenveredelung.
