English
الألمانية
العربيةالحالي
الفرنسية
الإندونيسية
اليابانية
الكورية
اللغة الملاوية
البرتغالية
الروسية
الإسبانية
التايلاندية
اللغة التركية
اللغة الفيتنامية
معدات الصرف الصحي والنظافة والسلامة في الغرف النظيفة
Touchless غسل اليد بالوعة
A hands-free stainless wash basin that reduces surface contact at cleanroom gowning, hygiene and personnel-transition points.
- Hands-Free Sensor Activation
- Radiused Stainless Basin
- Concealed Utility Connections
- Cleanable Splashback Design
مقدمة المنتج
The touchless hand washing sink combines a formed 304 or 316L stainless basin with an electronic sensor faucet and concealed water, drain and power connections. Rounded internal corners support routine wipe-down, while the integrated splashback protects the adjacent clean wall. Sensor range and shut-off timing can be adjusted for the intended workflow, and access panels keep valves and electrical components serviceable from the technical side where the room layout permits.
الخصائص الرئيسية
A deep radiused bowl directs splashing toward the drain and avoids sharp internal corners.
Concealed supply, solenoid and trap connections leave a simple wipe-clean exposed profile.
Wall-mounted, pedestal and multi-user configurations support different gowning-room layouts.
مخاوف المنتج للعملاء
Personnel need a reliable wash point that minimizes hand contact without creating difficult-to-clean ledges or exposed utility clutter.
Manual faucet handles can be re-contaminated immediately after washing.An infrared sensor and normally closed solenoid provide hands-free start and stop control.
Shallow bowls allow droplets to reach nearby clean walls and floors.A deep radiused basin and integrated rear splashback contain routine hand-washing spray.
Exposed valves and traps create cluttered surfaces that are slow to clean.Utilities are routed behind a removable service panel or within the wall-support assembly.
Different facilities use different water temperatures and hand-washing sequences.Optional thermostatic mixing, timed flow and soap-dispenser integration adapt the station to the operating procedure.
تطبيقات نموذجية
Pharmaceutical gowning roomsBiotechnology hygiene transitionsMedical-device clean areasLaboratory personnel entrances
المعلمات الفنية
Typical construction ranges for a single-user stainless touchless sink are listed below; final utility and mounting details are selected for the room layout.
| المواد الأساسية | AISI 304 or 316L stainless steel basin with electronic sensor faucet |
|---|---|
| سمك اللوحة | 1.2-1.5 mm basin and splashback body |
| العرض الفعال | 500-800 mm |
| الحد الأقصى الطول | Up to 1200 mm including splashback or pedestal |
| الصلب يواجه سمك | 1.2-1.5 mm exposed stainless surfaces |
| الكثافة الأساسية | 7900-8000 kg/m³ for stainless structural parts |
| الموصلية الحرارية | 14-16 W/(m·K) for stainless components |
| إنهاء السطح | Satin brushed or electropolished cleanable stainless finish |
| نوع المشترك | Continuously welded radiused basin with gasketed service panel and threaded utility connections |
| التخصيص | متوفر على أساس التطبيق المقصود وبيئة التشغيل. |
الخيارات المتاحة
Thermostatic mixing valveIntegrated touchless soap dispenserWall-mounted or pedestal supportSingle-user or multi-user basin
Planning a Touchless Hand Washing Sink specification?
أرسل لنا الأبعاد الخاصة بك، شروط التثبيت، أهداف الأداء والتشطيب السطحي المطلوب.
