Complete touchless cleanroom hand washing sink in three-quarter view with stainless basin and sensor faucet

Дренажное оборудование, оборудование для гигиены и безопасности в чистых помещениях

Touchless Hand Washing Sink

A hands-free stainless wash basin that reduces surface contact at cleanroom gowning, hygiene and personnel-transition points.

Hands-Free Sensor Activation
Radiused Stainless Basin
Concealed Utility Connections
Cleanable Splashback Design

Запрос котировки Просмотреть продукты

Введение продукции

The touchless hand washing sink combines a formed 304 or 316L stainless basin with an electronic sensor faucet and concealed water, drain and power connections. Rounded internal corners support routine wipe-down, while the integrated splashback protects the adjacent clean wall. Sensor range and shut-off timing can be adjusted for the intended workflow, and access panels keep valves and electrical components serviceable from the technical side where the room layout permits.

Основные характеристики

Infrared activation starts water flow without requiring the operator to touch a handle.

A deep radiused bowl directs splashing toward the drain and avoids sharp internal corners.

Concealed supply, solenoid and trap connections leave a simple wipe-clean exposed profile.

Wall-mounted, pedestal and multi-user configurations support different gowning-room layouts.

Обеспокоенность клиентов продуктами

Personnel need a reliable wash point that minimizes hand contact without creating difficult-to-clean ledges or exposed utility clutter.

Manual faucet handles can be re-contaminated immediately after washing.An infrared sensor and normally closed solenoid provide hands-free start and stop control.

Shallow bowls allow droplets to reach nearby clean walls and floors.A deep radiused basin and integrated rear splashback contain routine hand-washing spray.

Exposed valves and traps create cluttered surfaces that are slow to clean.Utilities are routed behind a removable service panel or within the wall-support assembly.

Different facilities use different water temperatures and hand-washing sequences.Optional thermostatic mixing, timed flow and soap-dispenser integration adapt the station to the operating procedure.

Типичные приложения

Pharmaceutical gowning roomsBiotechnology hygiene transitionsMedical-device clean areasLaboratory personnel entrances

Технические параметры

Typical construction ranges for a single-user stainless touchless sink are listed below; final utility and mounting details are selected for the room layout.

Основной материал	AISI 304 or 316L stainless steel basin with electronic sensor faucet
Толщина панели	1.2-1.5 mm basin and splashback body
эффективная ширина	500-800 mm
Максимальная длина	Up to 1200 mm including splashback or pedestal
Толщина линий стали	1.2-1.5 mm exposed stainless surfaces
Плотность ядра	7900 - 8000 кг / м3 для нержавеющих конструктивных деталей
Теплопроводимость	14 - 16 Вт / (м · К) для нержавеющих компонентов
Поверхностная отделка	Satin brushed or electropolished cleanable stainless finish
Объединенный тип	Continuously welded radiused basin with gasketed service panel and threaded utility connections
Customization	Доступно в зависимости от предполагаемого применения и операционной среды.

Доступные варианты

Thermostatic mixing valveIntegrated touchless soap dispenserWall-mounted or pedestal supportSingle-user or multi-user basin

Planning a Touchless Hand Washing Sink specification?

Отправьте нам ваши габариты, условия монтажа, целевые показатели производительности и требуемую отделку поверхности.

Поговорите с нашей командой