Inglés
Alemán
El árabe
Francés
Idioma indonesio
El japonés
Coreano
El malayo
El portugués
El ruso
EspañolCurrent
Tailandés
El turco
El vietnamita
Drenaje de sala limpia, equipos de higiene y seguridad
Touchless Hand Washing Sink
A hands-free stainless wash basin that reduces surface contact at cleanroom gowning, hygiene and personnel-transition points.
- Hands-Free Sensor Activation
- Radiused Stainless Basin
- Concealed Utility Connections
- Cleanable Splashback Design
Introducción del producto
The touchless hand washing sink combines a formed 304 or 316L stainless basin with an electronic sensor faucet and concealed water, drain and power connections. Rounded internal corners support routine wipe-down, while the integrated splashback protects the adjacent clean wall. Sensor range and shut-off timing can be adjusted for the intended workflow, and access panels keep valves and electrical components serviceable from the technical side where the room layout permits.
Características clave
A deep radiused bowl directs splashing toward the drain and avoids sharp internal corners.
Concealed supply, solenoid and trap connections leave a simple wipe-clean exposed profile.
Wall-mounted, pedestal and multi-user configurations support different gowning-room layouts.
Preocupaciones del producto del cliente
Personnel need a reliable wash point that minimizes hand contact without creating difficult-to-clean ledges or exposed utility clutter.
Manual faucet handles can be re-contaminated immediately after washing.An infrared sensor and normally closed solenoid provide hands-free start and stop control.
Shallow bowls allow droplets to reach nearby clean walls and floors.A deep radiused basin and integrated rear splashback contain routine hand-washing spray.
Exposed valves and traps create cluttered surfaces that are slow to clean.Utilities are routed behind a removable service panel or within the wall-support assembly.
Different facilities use different water temperatures and hand-washing sequences.Optional thermostatic mixing, timed flow and soap-dispenser integration adapt the station to the operating procedure.
Aplicaciones típicas
Pharmaceutical gowning roomsBiotechnology hygiene transitionsMedical-device clean areasLaboratory personnel entrances
Parámetros técnicos
Typical construction ranges for a single-user stainless touchless sink are listed below; final utility and mounting details are selected for the room layout.
| Materiales Core | AISI 304 or 316L stainless steel basin with electronic sensor faucet |
|---|---|
| Panel de espesor | 1.2-1.5 mm basin and splashback body |
| Ancho efectivo | 500-800 mm |
| Longitud máxima | Up to 1200 mm including splashback or pedestal |
| Acero frente a espesor | 1.2-1.5 mm exposed stainless surfaces |
| Densidad Core | 7900 - 8000 kg / m3 para piezas estructurales inoxidables |
| Conductividad térmica | 14 - 16 W / (m · K) para componentes inoxidables por |
| Superficie acabada | Satin brushed or electropolished cleanable stainless finish |
| Tipo conjunto | Continuously welded radiused basin with gasketed service panel and threaded utility connections |
| Customization | Disponible según la aplicación prevista y el entorno operativo. |
Opciones disponibles
Válvula de mezcla termostáticaIntegrated touchless soap dispenserWall-mounted or pedestal supportSingle-user or multi-user basin
Planning a Touchless Hand Washing Sink specification?
Envíenos sus dimensiones, condiciones de instalación, objetivos de rendimiento y acabado superficial requerido.
