Complete touchless cleanroom hand washing sink in three-quarter view with stainless basin and sensor faucet

クリーンルーム排水 · 衛生 · 安全設備

Touchless の手洗いシンク

A hands-free stainless wash basin that reduces surface contact at cleanroom gowning, hygiene and personnel-transition points.

Hands-Free Sensor Activation
Radiused Stainless Basin
Concealed Utility Connections
Cleanable Splashback Design

見積もりリクエスト製品案内

商品紹介

The touchless hand washing sink combines a formed 304 or 316L stainless basin with an electronic sensor faucet and concealed water, drain and power connections. Rounded internal corners support routine wipe-down, while the integrated splashback protects the adjacent clean wall. Sensor range and shut-off timing can be adjusted for the intended workflow, and access panels keep valves and electrical components serviceable from the technical side where the room layout permits.

主要な特徴

Infrared activation starts water flow without requiring the operator to touch a handle.

A deep radiused bowl directs splashing toward the drain and avoids sharp internal corners.

Concealed supply, solenoid and trap connections leave a simple wipe-clean exposed profile.

Wall-mounted, pedestal and multi-user configurations support different gowning-room layouts.

お客様の製品に関する懸念事項

Personnel need a reliable wash point that minimizes hand contact without creating difficult-to-clean ledges or exposed utility clutter.

Manual faucet handles can be re-contaminated immediately after washing.An infrared sensor and normally closed solenoid provide hands-free start and stop control.

Shallow bowls allow droplets to reach nearby clean walls and floors.A deep radiused basin and integrated rear splashback contain routine hand-washing spray.

Exposed valves and traps create cluttered surfaces that are slow to clean.Utilities are routed behind a removable service panel or within the wall-support assembly.

Different facilities use different water temperatures and hand-washing sequences.Optional thermostatic mixing, timed flow and soap-dispenser integration adapt the station to the operating procedure.

典型的な用途

Pharmaceutical gowning roomsBiotechnology hygiene transitionsMedical-device clean areasLaboratory personnel entrances

技術的なパラメータ

Typical construction ranges for a single-user stainless touchless sink are listed below; final utility and mounting details are selected for the room layout.

コア材料	AISI 304 or 316L stainless steel basin with electronic sensor faucet
パネルの厚さ	1.2-1.5 mm basin and splashback body
有効幅	500-800 mm
最大長さ	Up to 1200 mm including splashback or pedestal
鋼鉄の厚さを直面する	1.2-1.5 mm exposed stainless surfaces
コア密度	7900-8000 kg/m³ for stainless structural parts
熱伝導率	14-16 W/(m·K) for stainless components
表面仕上げ	Satin brushed or electropolished cleanable stainless finish
ジョイントタイプ	Continuously welded radiused basin with gasketed service panel and threaded utility connections
カスタマイズ	意図したアプリケーションと動作環境に基づいて利用できます。

利用可能なオプション

Thermostatic mixing valveIntegrated touchless soap dispenserWall-mounted or pedestal supportSingle-user or multi-user basin

Planning a Touchless Hand Washing Sink specification?

寸法、設置条件、性能目標、必要な表面仕上げをお送りください。

チームに相談する