Complete touchless cleanroom hand washing sink in three-quarter view with stainless basin and sensor faucet

클린룸 배수, 위생 및 안전 장비

Touchless Hand Washing Sink

A hands-free stainless wash basin that reduces surface contact at cleanroom gowning, hygiene and personnel-transition points.

Hands-Free Sensor Activation
Radiused Stainless Basin
Concealed Utility Connections
Cleanable Splashback Design

견적 요청 제품 찾아보기

상품 소개

The touchless hand washing sink combines a formed 304 or 316L stainless basin with an electronic sensor faucet and concealed water, drain and power connections. Rounded internal corners support routine wipe-down, while the integrated splashback protects the adjacent clean wall. Sensor range and shut-off timing can be adjusted for the intended workflow, and access panels keep valves and electrical components serviceable from the technical side where the room layout permits.

주요 기능

Infrared activation starts water flow without requiring the operator to touch a handle.

A deep radiused bowl directs splashing toward the drain and avoids sharp internal corners.

Concealed supply, solenoid and trap connections leave a simple wipe-clean exposed profile.

Wall-mounted, pedestal and multi-user configurations support different gowning-room layouts.

고객 제품 관심사

Personnel need a reliable wash point that minimizes hand contact without creating difficult-to-clean ledges or exposed utility clutter.

Manual faucet handles can be re-contaminated immediately after washing.An infrared sensor and normally closed solenoid provide hands-free start and stop control.

Shallow bowls allow droplets to reach nearby clean walls and floors.A deep radiused basin and integrated rear splashback contain routine hand-washing spray.

Exposed valves and traps create cluttered surfaces that are slow to clean.Utilities are routed behind a removable service panel or within the wall-support assembly.

Different facilities use different water temperatures and hand-washing sequences.Optional thermostatic mixing, timed flow and soap-dispenser integration adapt the station to the operating procedure.

일반적인 응용 프로그램

Pharmaceutical gowning roomsBiotechnology hygiene transitionsMedical-device clean areasLaboratory personnel entrances

기술 매개변수

Typical construction ranges for a single-user stainless touchless sink are listed below; final utility and mounting details are selected for the room layout.

핵심 재료	AISI 304 or 316L stainless steel basin with electronic sensor faucet
패널 두께	1.2-1.5 mm basin and splashback body
유효 폭	500-800 mm
최대 길이	Up to 1200 mm including splashback or pedestal
강철 면면 두께	1.2-1.5 mm exposed stainless surfaces
코어 밀도	7900-8000 kg/m³ for stainless structural parts
열전도도 (Thermal Conductivity)	14-16 W/(m·K) for stainless components
표면 마무리	Satin brushed or electropolished cleanable stainless finish
접합 유형	Continuously welded radiused basin with gasketed service panel and threaded utility connections
사용자 정의	의도된 응용 프로그램 및 운영 환경에 따라 사용할 수 있습니다.

사용 가능한 옵션

Thermostatic mixing valveIntegrated touchless soap dispenserWall-mounted or pedestal supportSingle-user or multi-user basin

Planning a Touchless Hand Washing Sink specification?

치수, 설치 조건, 성능 목표 및 필요한 표면 마감을 보내십시오.

우리 팀과 대화하십시오.