English
الألمانية
العربيةالحالي
الفرنسية
الإندونيسية
اليابانية
الكورية
اللغة الملاوية
البرتغالية
الروسية
الإسبانية
التايلاندية
اللغة التركية
اللغة الفيتنامية
اكسسوارات تركيب الغرف النظيفة
ختم اختراق الأنابيب
A bolted EPDM compression seal that closes the annular gap between a service pipe and a cleanroom wall sleeve.
- Radial EPDM Compression
- Stainless Pressure Plates
- Six-Point Bolt Loading
- Replaceable Mechanical Seal
مقدمة المنتج
The pipe penetration seal uses a thick annular EPDM element between two circular stainless pressure plates. Even tightening of six perimeter fasteners compresses the elastomer axially and drives it radially against the service pipe and sleeve bore. The removable assembly creates a controlled, cleanable transition without permanently bonding the pipe into the wall opening.
الخصائص الرئيسية
Six evenly spaced fasteners distribute loading around the circumference.
Stainless plates provide smooth exposed faces suitable for controlled interiors.
A mechanical assembly can be inspected, retightened or replaced when service arrangements change.
مخاوف المنتج للعملاء
The annular gap around a pipe can leak air, collect residue and transmit vibration unless it is closed with a compatible flexible seal.
Irregular bolt loading leaves local leakage paths around the pipe.Six equally spaced fasteners apply controlled circumferential compression.
Rigid grout cannot accommodate pipe movement or vibration.The EPDM annulus retains elastic contact with the pipe and sleeve surfaces.
Permanent sealants complicate later pipe replacement.The bolted pressure-plate assembly can be released and removed for service.
Rough exposed filler is difficult to wipe clean.Smooth stainless face plates create defined, accessible room-side surfaces.
تطبيقات نموذجية
Cleanroom process-pipe penetrationsUtility line wall sleevesConduit and service passagesHygienic partition transitionsEquipment service connections
المعلمات الفنية
Typical construction ranges for a stainless-plate EPDM pipe penetration compression seal are listed below.
| المواد الأساسية | Black EPDM annular seal with 304 or 316 stainless compression plates and fasteners |
|---|---|
| سمك اللوحة | 40-200 mm compatible wall and sleeve assembly thickness |
| العرض الفعال | 20-250 mm pipe opening diameter |
| الحد الأقصى الطول | Up to 350 mm overall seal outside diameter |
| الصلب يواجه سمك | 2.00-6.00 mm stainless compression-plate thickness |
| الكثافة الأساسية | Approximately 1100-1300 kg/m³ for EPDM elastomer |
| الموصلية الحرارية | Approximately 0.20-0.30 W/(m·K) for EPDM |
| إنهاء السطح | Black molded EPDM with brushed or satin stainless pressure plates |
| نوع المشترك | Bolted axial compression producing radial pipe-to-sleeve sealing |
| التخصيص | متوفر على أساس التطبيق المقصود وبيئة التشغيل. |
الخيارات المتاحة
EPDM or silicone elastomer304 or 316 stainless hardwareSplit-ring retrofit constructionCustom pipe and sleeve diameters
Planning a Pipe Penetration Seal specification?
أرسل لنا الأبعاد الخاصة بك، شروط التثبيت، أهداف الأداء والتشطيب السطحي المطلوب.
