English
Немецкий
Арабский язык
Французский
Индонезийский
Японский язык
Корейский
Японский
Португальский
Русский языкТекущий
Испанский язык
Тайский
Турецкий
Вьетнамский язык
Аксессуары для установки в чистых помещениях
Проникновение трубы
A bolted EPDM compression seal that closes the annular gap between a service pipe and a cleanroom wall sleeve.
- Radial EPDM Compression
- Stainless Pressure Plates
- Six-Point Bolt Loading
- Replaceable Mechanical Seal
Введение продукции
The pipe penetration seal uses a thick annular EPDM element between two circular stainless pressure plates. Even tightening of six perimeter fasteners compresses the elastomer axially and drives it radially against the service pipe and sleeve bore. The removable assembly creates a controlled, cleanable transition without permanently bonding the pipe into the wall opening.
Основные характеристики
Six evenly spaced fasteners distribute loading around the circumference.
Stainless plates provide smooth exposed faces suitable for controlled interiors.
A mechanical assembly can be inspected, retightened or replaced when service arrangements change.
Обеспокоенность клиентов продуктами
The annular gap around a pipe can leak air, collect residue and transmit vibration unless it is closed with a compatible flexible seal.
Irregular bolt loading leaves local leakage paths around the pipe.Six equally spaced fasteners apply controlled circumferential compression.
Rigid grout cannot accommodate pipe movement or vibration.The EPDM annulus retains elastic contact with the pipe and sleeve surfaces.
Permanent sealants complicate later pipe replacement.The bolted pressure-plate assembly can be released and removed for service.
Rough exposed filler is difficult to wipe clean.Smooth stainless face plates create defined, accessible room-side surfaces.
Типичные приложения
Cleanroom process-pipe penetrationsUtility line wall sleevesConduit and service passagesHygienic partition transitionsEquipment service connections
Технические параметры
Typical construction ranges for a stainless-plate EPDM pipe penetration compression seal are listed below.
| Основной материал | Black EPDM annular seal with 304 or 316 stainless compression plates and fasteners |
|---|---|
| Толщина панели | 40-200 mm compatible wall and sleeve assembly thickness |
| эффективная ширина | 20-250 mm pipe opening diameter |
| Максимальная длина | Up to 350 mm overall seal outside diameter |
| Толщина линий стали | 2.00-6.00 mm stainless compression-plate thickness |
| Плотность ядра | Approximately 1100-1300 kg/m³ for EPDM elastomer |
| Теплопроводимость | Approximately 0.20-0.30 W/(m·K) for EPDM |
| Поверхностная отделка | Black molded EPDM with brushed or satin stainless pressure plates |
| Объединенный тип | Bolted axial compression producing radial pipe-to-sleeve sealing |
| Customization | Доступно в зависимости от предполагаемого применения и операционной среды. |
Доступные варианты
EPDM or silicone elastomer304 or 316 stainless hardwareSplit-ring retrofit constructionCustom pipe and sleeve diameters
Planning a Pipe Penetration Seal specification?
Отправьте нам ваши габариты, условия монтажа, целевые показатели производительности и требуемую отделку поверхности.
