Three-quarter view of an EPDM pipe penetration seal with stainless plates

クリーンルームの設置付属品

パイプ浸透シール

A bolted EPDM compression seal that closes the annular gap between a service pipe and a cleanroom wall sleeve.

Radial EPDM Compression
Stainless Pressure Plates
Six-Point Bolt Loading
Replaceable Mechanical Seal

商品紹介

The pipe penetration seal uses a thick annular EPDM element between two circular stainless pressure plates. Even tightening of six perimeter fasteners compresses the elastomer axially and drives it radially against the service pipe and sleeve bore. The removable assembly creates a controlled, cleanable transition without permanently bonding the pipe into the wall opening.

主要な特徴

Axial plate compression expands the EPDM ring radially against both sealing surfaces.

Six evenly spaced fasteners distribute loading around the circumference.

Stainless plates provide smooth exposed faces suitable for controlled interiors.

A mechanical assembly can be inspected, retightened or replaced when service arrangements change.

お客様の製品に関する懸念事項

The annular gap around a pipe can leak air, collect residue and transmit vibration unless it is closed with a compatible flexible seal.

Irregular bolt loading leaves local leakage paths around the pipe.Six equally spaced fasteners apply controlled circumferential compression.

Rigid grout cannot accommodate pipe movement or vibration.The EPDM annulus retains elastic contact with the pipe and sleeve surfaces.

Permanent sealants complicate later pipe replacement.The bolted pressure-plate assembly can be released and removed for service.

Rough exposed filler is difficult to wipe clean.Smooth stainless face plates create defined, accessible room-side surfaces.

典型的な用途

Cleanroom process-pipe penetrationsUtility line wall sleevesConduit and service passagesHygienic partition transitionsEquipment service connections

技術的なパラメータ

Typical construction ranges for a stainless-plate EPDM pipe penetration compression seal are listed below.

コア材料	Black EPDM annular seal with 304 or 316 stainless compression plates and fasteners
パネルの厚さ	40-200 mm compatible wall and sleeve assembly thickness
有効幅	20-250 mm pipe opening diameter
最大長さ	Up to 350 mm overall seal outside diameter
鋼鉄の厚さを直面する	2.00-6.00 mm stainless compression-plate thickness
コア密度	Approximately 1100-1300 kg/m³ for EPDM elastomer
熱伝導率	Approximately 0.20-0.30 W/(m·K) for EPDM
表面仕上げ	Black molded EPDM with brushed or satin stainless pressure plates
ジョイントタイプ	Bolted axial compression producing radial pipe-to-sleeve sealing
カスタマイズ	意図したアプリケーションと動作環境に基づいて利用できます。

利用可能なオプション

EPDM or silicone elastomer304 or 316 stainless hardwareSplit-ring retrofit constructionCustom pipe and sleeve diameters

Planning a Pipe Penetration Seal specification?

寸法、設置条件、性能目標、必要な表面仕上げをお送りください。

チームに相談する