Inglés
Alemán
El árabe
Francés
Idioma indonesio
El japonés
Coreano
El malayo
El portugués
El ruso
EspañolCurrent
Tailandés
El turco
El vietnamita
Accesorios de instalación de sala limpia
Pipa de penetración Seal
A bolted EPDM compression seal that closes the annular gap between a service pipe and a cleanroom wall sleeve.
- Radial EPDM Compression
- Stainless Pressure Plates
- Six-Point Bolt Loading
- Replaceable Mechanical Seal
Introducción del producto
The pipe penetration seal uses a thick annular EPDM element between two circular stainless pressure plates. Even tightening of six perimeter fasteners compresses the elastomer axially and drives it radially against the service pipe and sleeve bore. The removable assembly creates a controlled, cleanable transition without permanently bonding the pipe into the wall opening.
Características clave
Six evenly spaced fasteners distribute loading around the circumference.
Stainless plates provide smooth exposed faces suitable for controlled interiors.
A mechanical assembly can be inspected, retightened or replaced when service arrangements change.
Preocupaciones del producto del cliente
The annular gap around a pipe can leak air, collect residue and transmit vibration unless it is closed with a compatible flexible seal.
Irregular bolt loading leaves local leakage paths around the pipe.Six equally spaced fasteners apply controlled circumferential compression.
Rigid grout cannot accommodate pipe movement or vibration.The EPDM annulus retains elastic contact with the pipe and sleeve surfaces.
Permanent sealants complicate later pipe replacement.The bolted pressure-plate assembly can be released and removed for service.
Rough exposed filler is difficult to wipe clean.Smooth stainless face plates create defined, accessible room-side surfaces.
Aplicaciones típicas
Cleanroom process-pipe penetrationsUtility line wall sleevesConduit and service passagesHygienic partition transitionsEquipment service connections
Parámetros técnicos
Typical construction ranges for a stainless-plate EPDM pipe penetration compression seal are listed below.
| Materiales Core | Black EPDM annular seal with 304 or 316 stainless compression plates and fasteners |
|---|---|
| Panel de espesor | 40-200 mm compatible wall and sleeve assembly thickness |
| Ancho efectivo | 20-250 mm pipe opening diameter |
| Longitud máxima | Up to 350 mm overall seal outside diameter |
| Acero frente a espesor | 2.00-6.00 mm stainless compression-plate thickness |
| Densidad Core | Approximately 1100-1300 kg/m³ for EPDM elastomer |
| Conductividad térmica | Approximately 0.20-0.30 W/(m·K) for EPDM |
| Superficie acabada | Black molded EPDM with brushed or satin stainless pressure plates |
| Tipo conjunto | Bolted axial compression producing radial pipe-to-sleeve sealing |
| Customization | Disponible según la aplicación prevista y el entorno operativo. |
Opciones disponibles
EPDM or silicone elastomer304 or 316 stainless hardwareSplit-ring retrofit constructionCustom pipe and sleeve diameters
Planning a Pipe Penetration Seal specification?
Envíenos sus dimensiones, condiciones de instalación, objetivos de rendimiento y acabado superficial requerido.
