English
الألمانية
العربيةالحالي
الفرنسية
الإندونيسية
اليابانية
الكورية
اللغة الملاوية
البرتغالية
الروسية
الإسبانية
التايلاندية
اللغة التركية
اللغة الفيتنامية
معدات التدفق والاحتواء الصفائحية
PCR إعداد محطة العمل
A positive filtered-air workstation that provides an organized clean zone for pre-amplification reagent and master-mix preparation.
- Positive Filtered Work Zone
- UV-Compatible Interior
- Pre-Amplification Workflow
- Pipette and Reagent Organization
مقدمة المنتج
The PCR preparation workstation is dedicated to clean pre-amplification setup rather than biological containment. Filtered positive airflow reduces particle entry, while a closed front cover can shield the interior between sessions. UV-resistant side panels, a stainless work tray and removable pipette racks support cleaning and organized reagent handling. A timed UV lamp may be included for surface exposure when the cabinet is closed and unoccupied, but it does not replace validated cleaning procedures.
الخصائص الرئيسية
A dedicated layout separates clean pipettes, tubes and reagent staging positions.
UV-resistant enclosure materials tolerate timed surface-exposure cycles.
A closed cover prevents direct user exposure while the UV lamp is operating.
The lift-out stainless tray exposes the lower surface after spills.
مخاوف المنتج للعملاء
Pre-amplification work is vulnerable to carryover contamination, but a clean PCR station must not be confused with a biological safety cabinet.
Amplified material is brought into the clean setup area.Dedicated storage and clear workflow labeling support a one-way pre-amplification process.
Pipettes and tubes are placed randomly across the work surface.Removable racks create defined clean and in-use positions.
UV light reaches the operator through an open front.The timed lamp operates only with the protective cover closed and the station unoccupied.
Users expect protection from hazardous aerosols.Application guidance limits the workstation to non-hazardous clean preparation.
تطبيقات نموذجية
PCR master-mix preparationPre-amplification reagent setupMolecular diagnostic kit assemblyClean pipetting of non-hazardous samples
المعلمات الفنية
Typical configurable construction ranges for a PCR preparation workstation are listed below.
| المواد الأساسية | SUS304 work tray with powder-coated steel filter housing and UV-resistant polycarbonate enclosure panels |
|---|---|
| سمك اللوحة | 20-35 mm framed enclosure sections |
| العرض الفعال | 600-1200 mm clear working width |
| الحد الأقصى الطول | Up to 900 mm overall workstation depth |
| الصلب يواجه سمك | 0.8-1.0 mm filter housing; 1.0-1.2 mm SUS304 work tray |
| الكثافة الأساسية | ما يقرب من 1200 كجم / م3 لألواح العلبة البولي كربونات الصلبة |
| الموصلية الحرارية | 0.19-0.22 W / (m·K) لألواح البولي كربونات |
| إنهاء السطح | White powder-coated housing, clear UV-resistant panels and brushed stainless work tray |
| نوع المشترك | Gasketed modular enclosure with lift-out work tray and interlocked front cover |
| التخصيص | متوفر على أساس التطبيق المقصود وبيئة التشغيل. |
الخيارات المتاحة
HEPA or ULPA supply filterTimed UV lamp with cover interlockPipette and tube racksBenchtop or base-stand format
Planning a PCR Preparation Workstation specification?
أرسل لنا الأبعاد الخاصة بك، شروط التثبيت، أهداف الأداء والتشطيب السطحي المطلوب.
