PCR preparation workstation with clear enclosure and stainless tray

Laminar Flow ve Containment Equipment

PCR Hazırlık İş İstasyonu

A positive filtered-air workstation that provides an organized clean zone for pre-amplification reagent and master-mix preparation.

Positive Filtered Work Zone
UV-Compatible Interior
Pre-Amplification Workflow
Pipette and Reagent Organization

Alıntı isteği Browse ürünleri

Ürün tanıtımı

The PCR preparation workstation is dedicated to clean pre-amplification setup rather than biological containment. Filtered positive airflow reduces particle entry, while a closed front cover can shield the interior between sessions. UV-resistant side panels, a stainless work tray and removable pipette racks support cleaning and organized reagent handling. A timed UV lamp may be included for surface exposure when the cabinet is closed and unoccupied, but it does not replace validated cleaning procedures.

Ana Özellikler

Positive filtered air reduces room-borne particle entry during reagent preparation.

A dedicated layout separates clean pipettes, tubes and reagent staging positions.

UV-resistant enclosure materials tolerate timed surface-exposure cycles.

A closed cover prevents direct user exposure while the UV lamp is operating.

The lift-out stainless tray exposes the lower surface after spills.

Müşteri Ürün Sorunları

Pre-amplification work is vulnerable to carryover contamination, but a clean PCR station must not be confused with a biological safety cabinet.

Amplified material is brought into the clean setup area.Dedicated storage and clear workflow labeling support a one-way pre-amplification process.

Pipettes and tubes are placed randomly across the work surface.Removable racks create defined clean and in-use positions.

UV light reaches the operator through an open front.The timed lamp operates only with the protective cover closed and the station unoccupied.

Users expect protection from hazardous aerosols.Application guidance limits the workstation to non-hazardous clean preparation.

Tipik uygulamalar

PCR master-mix preparationPre-amplification reagent setupMolecular diagnostic kit assemblyClean pipetting of non-hazardous samples

Teknik parametreler

Typical configurable construction ranges for a PCR preparation workstation are listed below.

Temel malzemeler	SUS304 work tray with powder-coated steel filter housing and UV-resistant polycarbonate enclosure panels
Panel kalınlığı	20-35 mm framed enclosure sections
Effective Width (Etkili Genişlik)	600-1200 mm clear working width
Maksimum uzunluk	Up to 900 mm overall workstation depth
Çelik yüz yüze kalınlığı	0.8-1.0 mm filter housing; 1.0-1.2 mm SUS304 work tray
Core Density (Çekirdek Yoğunluğu)	Approximately 1200 kg/m³ for solid polycarbonate enclosure panels
Termal İletkenlik	0.19-0.22 W/(m·K) for polycarbonate panels
Yüzey bitirme	White powder-coated housing, clear UV-resistant panels and brushed stainless work tray
Ortak tip	Gasketed modular enclosure with lift-out work tray and interlocked front cover
Customization (Özelleşme)	Kullanılan uygulama ve çalışma ortamına göre kullanılabilir.

Mevcut Seçenekler

HEPA or ULPA supply filterTimed UV lamp with cover interlockPipette and tube racksBenchtop or base-stand format

Planning a PCR Preparation Workstation specification?

Bize boyutlarınızı, montaj koşullarınızı, performans hedeflerinizi ve gerekli yüzey kaplamalarınızı gönderin.

Ekibimizle konuşun