PCR preparation workstation with clear enclosure and stainless tray

Laminar Flow and Containment Equipment 에 대한 리뷰 보기

PCR 준비 워크스테이션

A positive filtered-air workstation that provides an organized clean zone for pre-amplification reagent and master-mix preparation.

Positive Filtered Work Zone
UV-Compatible Interior
Pre-Amplification Workflow
Pipette and Reagent Organization

견적 요청 제품 찾아보기

상품 소개

The PCR preparation workstation is dedicated to clean pre-amplification setup rather than biological containment. Filtered positive airflow reduces particle entry, while a closed front cover can shield the interior between sessions. UV-resistant side panels, a stainless work tray and removable pipette racks support cleaning and organized reagent handling. A timed UV lamp may be included for surface exposure when the cabinet is closed and unoccupied, but it does not replace validated cleaning procedures.

주요 기능

Positive filtered air reduces room-borne particle entry during reagent preparation.

A dedicated layout separates clean pipettes, tubes and reagent staging positions.

UV-resistant enclosure materials tolerate timed surface-exposure cycles.

A closed cover prevents direct user exposure while the UV lamp is operating.

The lift-out stainless tray exposes the lower surface after spills.

고객 제품 관심사

Pre-amplification work is vulnerable to carryover contamination, but a clean PCR station must not be confused with a biological safety cabinet.

Amplified material is brought into the clean setup area.Dedicated storage and clear workflow labeling support a one-way pre-amplification process.

Pipettes and tubes are placed randomly across the work surface.Removable racks create defined clean and in-use positions.

UV light reaches the operator through an open front.The timed lamp operates only with the protective cover closed and the station unoccupied.

Users expect protection from hazardous aerosols.Application guidance limits the workstation to non-hazardous clean preparation.

일반적인 응용 프로그램

PCR master-mix preparationPre-amplification reagent setupMolecular diagnostic kit assemblyClean pipetting of non-hazardous samples

기술 매개변수

Typical configurable construction ranges for a PCR preparation workstation are listed below.

핵심 재료	SUS304 work tray with powder-coated steel filter housing and UV-resistant polycarbonate enclosure panels
패널 두께	20-35 mm framed enclosure sections
유효 폭	600-1200 mm clear working width
최대 길이	Up to 900 mm overall workstation depth
강철 면면 두께	0.8-1.0 mm filter housing; 1.0-1.2 mm SUS304 work tray
코어 밀도	솔리드 폴리카보네이트 엔클로저 패널의 경우 약 1200 kg / m 3
열전도도 (Thermal Conductivity)	0. 19 - 0. 22 W / (m · K) 폴리카보네이트 패널
표면 마무리	White powder-coated housing, clear UV-resistant panels and brushed stainless work tray
접합 유형	Gasketed modular enclosure with lift-out work tray and interlocked front cover
사용자 정의	의도된 응용 프로그램 및 운영 환경에 따라 사용할 수 있습니다.

사용 가능한 옵션

HEPA or ULPA supply filterTimed UV lamp with cover interlockPipette and tube racksBenchtop or base-stand format

Planning a PCR Preparation Workstation specification?

치수, 설치 조건, 성능 목표 및 필요한 표면 마감을 보내십시오.

우리 팀과 대화하십시오.