PCR preparation workstation with clear enclosure and stainless tray

Aliran Laminar dan Peralatan Pengekangan

Stesen Kerja Persiapan PCR

A positive filtered-air workstation that provides an organized clean zone for pre-amplification reagent and master-mix preparation.

Positive Filtered Work Zone
UV-Compatible Interior
Pre-Amplification Workflow
Pipette and Reagent Organization

Permintaan sebut harga Semak imbas produk

Pengenalan Produk

The PCR preparation workstation is dedicated to clean pre-amplification setup rather than biological containment. Filtered positive airflow reduces particle entry, while a closed front cover can shield the interior between sessions. UV-resistant side panels, a stainless work tray and removable pipette racks support cleaning and organized reagent handling. A timed UV lamp may be included for surface exposure when the cabinet is closed and unoccupied, but it does not replace validated cleaning procedures.

Ciri-ciri Utama

Positive filtered air reduces room-borne particle entry during reagent preparation.

A dedicated layout separates clean pipettes, tubes and reagent staging positions.

UV-resistant enclosure materials tolerate timed surface-exposure cycles.

A closed cover prevents direct user exposure while the UV lamp is operating.

The lift-out stainless tray exposes the lower surface after spills.

Kebimbangan Produk Pelanggan

Pre-amplification work is vulnerable to carryover contamination, but a clean PCR station must not be confused with a biological safety cabinet.

Amplified material is brought into the clean setup area.Dedicated storage and clear workflow labeling support a one-way pre-amplification process.

Pipettes and tubes are placed randomly across the work surface.Removable racks create defined clean and in-use positions.

UV light reaches the operator through an open front.The timed lamp operates only with the protective cover closed and the station unoccupied.

Users expect protection from hazardous aerosols.Application guidance limits the workstation to non-hazardous clean preparation.

Permohonan yang biasa

PCR master-mix preparationPre-amplification reagent setupMolecular diagnostic kit assemblyClean pipetting of non-hazardous samples

Parameter teknikal

Typical configurable construction ranges for a PCR preparation workstation are listed below.

Bahan Teras	SUS304 work tray with powder-coated steel filter housing and UV-resistant polycarbonate enclosure panels
Ketebalan Panel	20-35 mm framed enclosure sections
Lebar berkesan	600-1200 mm clear working width
Panjang maksimum	Up to 900 mm overall workstation depth
Keluli Menghadapi Ketebalan	0.8-1.0 mm filter housing; 1.0-1.2 mm SUS304 work tray
Ketumpatan teras	Kira-kira 1200 kg / m3 untuk panel kandang polikarbonat pepejal
Kekonduksian Terma	0.19-0.22 W / (m · K) untuk panel polikarbonat
Kemasan permukaan	White powder-coated housing, clear UV-resistant panels and brushed stainless work tray
Jenis Bersatu	Gasketed modular enclosure with lift-out work tray and interlocked front cover
Penyesuaian	Boleh didapati berdasarkan aplikasi yang dimaksudkan dan persekitaran operasi.

Pilihan yang boleh didapati

HEPA or ULPA supply filterTimed UV lamp with cover interlockPipette and tube racksBenchtop or base-stand format

Planning a PCR Preparation Workstation specification?

Hantarkan kepada kami dimensi anda, syarat pemasangan, sasaran prestasi dan kemasan permukaan yang diperlukan.

Berbincang dengan pasukan kami