English
الألمانية
العربيةالحالي
الفرنسية
الإندونيسية
اليابانية
الكورية
اللغة الملاوية
البرتغالية
الروسية
الإسبانية
التايلاندية
اللغة التركية
اللغة الفيتنامية
أنظمة التحكم في الغرف النظيفة والمراقبة البيئية
Pass صندوق نظام التشابك
A compact paired-door interlock that keeps opposite pass box doors mutually exclusive and gives operators clear release, locked and door-open feedback.
- Mutually Exclusive Doors
- Compact Embedded Controller
- Door-Open Alarm
- Timed Opposite-Door Release
مقدمة المنتج
The pass box interlock system is designed for two closely coupled transfer-hatch doors. Magnetic contacts confirm the actual door position, while compact electric strikes or electromagnetic locks enforce the interlock. Stainless pushbutton indicators on each side show whether the local door is available, occupied or locked. A release delay can be added after closure, and optional germicidal-cycle or purge-ready inputs can hold both doors locked while the pass box completes its internal sequence.
الخصائص الرئيسية
Door contacts verify physical closure instead of relying only on the lock command.
Illuminated stainless buttons communicate local request and availability at both sides.
Optional cycle input keeps both doors secured during purge or internal treatment operation.
مخاوف المنتج للعملاء
A pass box interlock must fit a compact enclosure and tolerate frequent door cycles while protecting the transfer boundary.
One door appears closed but the latch has not fully seated.A dedicated magnetic contact confirms actual closure before the opposite lock releases.
Operators on opposite sides cannot see which door is being used.Local illuminated indicators show available, occupied and alarm states on both faces.
Door slamming causes contacts to bounce and the opposite lock to chatter.Input debounce and a short release delay stabilize the sequence after closure.
A purge or treatment cycle is interrupted by an early door request.A cycle-hold input locks both doors until the pass box confirms completion.
تطبيقات نموذجية
Static transfer hatchesDynamic pass boxesSterile material transferLaboratory specimen pass-throughs
المعلمات الفنية
Typical materials and dimensions for a compact pass box door interlock controller are shown below.
| المواد الأساسية | Stainless steel faceplates with FR-4 interlock board, copper relays and flame-retardant polymer terminals |
|---|---|
| سمك اللوحة | 35-90 mm embedded controller depth |
| العرض الفعال | 100-250 mm controller or faceplate width |
| الحد الأقصى الطول | Up to 350 mm controller enclosure length |
| الصلب يواجه سمك | 1.0-1.5 mm 304 stainless steel faceplates |
| الكثافة الأساسية | 7900-8030 kg/m³ for 304 stainless steel parts |
| الموصلية الحرارية | 14-17 W/(m·K) for 304 stainless steel faceplates |
| إنهاء السطح | Brushed 304 stainless steel with green request and red locked indicators |
| نوع المشترك | Embedded two-door controller with quick-connect lock, contact, lamp and cycle terminals |
| التخصيص | متوفر على أساس التطبيق المقصود وبيئة التشغيل. |
الخيارات المتاحة
Electric strike or magnetic lockPurge-cycle lock inputDoor-open buzzerFlush stainless indicator plates
Planning a Pass Box Interlock System specification?
أرسل لنا الأبعاد الخاصة بك، شروط التثبيت، أهداف الأداء والتشطيب السطحي المطلوب.
