Bahasa Inggris
Bahasa Jerman
Bahasa Arab
Bahasa Perancis: Bahasa Perancis
Bahasa IndonesiaSaat ini
Bahasa Jepang
Bahasa Korea
Bahasa Melayu
Bahasa Portugis
Bahasa Rusia
Bahasa Spanyol
Bahasa Thailand
Bahasa Turki
Bahasa Vietnam
Kontrol Cleanroom dan Sistem Pemantauan Lingkungan
Pass Box Interlock Sistem
A compact paired-door interlock that keeps opposite pass box doors mutually exclusive and gives operators clear release, locked and door-open feedback.
- Mutually Exclusive Doors
- Compact Embedded Controller
- Door-Open Alarm
- Timed Opposite-Door Release
Perkenalan produk
The pass box interlock system is designed for two closely coupled transfer-hatch doors. Magnetic contacts confirm the actual door position, while compact electric strikes or electromagnetic locks enforce the interlock. Stainless pushbutton indicators on each side show whether the local door is available, occupied or locked. A release delay can be added after closure, and optional germicidal-cycle or purge-ready inputs can hold both doors locked while the pass box completes its internal sequence.
Fitur utama:
Door contacts verify physical closure instead of relying only on the lock command.
Illuminated stainless buttons communicate local request and availability at both sides.
Optional cycle input keeps both doors secured during purge or internal treatment operation.
Kekhawatiran produk pelanggan
A pass box interlock must fit a compact enclosure and tolerate frequent door cycles while protecting the transfer boundary.
One door appears closed but the latch has not fully seated.A dedicated magnetic contact confirms actual closure before the opposite lock releases.
Operators on opposite sides cannot see which door is being used.Local illuminated indicators show available, occupied and alarm states on both faces.
Door slamming causes contacts to bounce and the opposite lock to chatter.Input debounce and a short release delay stabilize the sequence after closure.
A purge or treatment cycle is interrupted by an early door request.A cycle-hold input locks both doors until the pass box confirms completion.
Aplikasi yang Tipis
Static transfer hatchesDynamic pass boxesSterile material transferLaboratory specimen pass-throughs
Parameter teknis
Typical materials and dimensions for a compact pass box door interlock controller are shown below.
| Bahan inti | Stainless steel faceplates with FR-4 interlock board, copper relays and flame-retardant polymer terminals |
|---|---|
| Ketebalan Panel (Panel Thickness) | 35-90 mm embedded controller depth |
| Efektif lebar | 100-250 mm controller or faceplate width |
| Panjang maksimum | Up to 350 mm controller enclosure length |
| Baja menghadap ketebalan | 1.0-1.5 mm 304 stainless steel faceplates |
| Kepadatan inti (core density) | 7900-8030 kg/m³ for 304 stainless steel parts |
| Konduktivitas Termal (Thermal Conductivity) | 14-17 W/(m·K) for 304 stainless steel faceplates |
| Permukaan selesai | Brushed 304 stainless steel with green request and red locked indicators |
| Jenis Bersama | Embedded two-door controller with quick-connect lock, contact, lamp and cycle terminals |
| Customization (Kustomisasi) | Tersedia berdasarkan aplikasi yang dimaksudkan dan lingkungan operasi. |
Pilihan yang tersedia
Electric strike or magnetic lockPurge-cycle lock inputDoor-open buzzerFlush stainless indicator plates
Planning a Pass Box Interlock System specification?
Kirimkan kami dimensi Anda, kondisi instalasi, target kinerja dan permukaan akhir yang diperlukan.
