Complete pass box interlock kit with compact controller, two stainless indicators and paired magnetic locks

클린룸 제어 및 환경 모니터링 시스템 (Cleanroom Control and Environment Monitoring Systems)

패스 박스 인터락 시스템

A compact paired-door interlock that keeps opposite pass box doors mutually exclusive and gives operators clear release, locked and door-open feedback.

Mutually Exclusive Doors
Compact Embedded Controller
Door-Open Alarm
Timed Opposite-Door Release

견적 요청 제품 찾아보기

상품 소개

The pass box interlock system is designed for two closely coupled transfer-hatch doors. Magnetic contacts confirm the actual door position, while compact electric strikes or electromagnetic locks enforce the interlock. Stainless pushbutton indicators on each side show whether the local door is available, occupied or locked. A release delay can be added after closure, and optional germicidal-cycle or purge-ready inputs can hold both doors locked while the pass box completes its internal sequence.

주요 기능

A dedicated two-door logic board fits within the pass box service compartment.

Door contacts verify physical closure instead of relying only on the lock command.

Illuminated stainless buttons communicate local request and availability at both sides.

Optional cycle input keeps both doors secured during purge or internal treatment operation.

고객 제품 관심사

A pass box interlock must fit a compact enclosure and tolerate frequent door cycles while protecting the transfer boundary.

One door appears closed but the latch has not fully seated.A dedicated magnetic contact confirms actual closure before the opposite lock releases.

Operators on opposite sides cannot see which door is being used.Local illuminated indicators show available, occupied and alarm states on both faces.

Door slamming causes contacts to bounce and the opposite lock to chatter.Input debounce and a short release delay stabilize the sequence after closure.

A purge or treatment cycle is interrupted by an early door request.A cycle-hold input locks both doors until the pass box confirms completion.

일반적인 응용 프로그램

Static transfer hatchesDynamic pass boxesSterile material transferLaboratory specimen pass-throughs

기술 매개변수

Typical materials and dimensions for a compact pass box door interlock controller are shown below.

핵심 재료	Stainless steel faceplates with FR-4 interlock board, copper relays and flame-retardant polymer terminals
패널 두께	35-90 mm embedded controller depth
유효 폭	100-250 mm controller or faceplate width
최대 길이	Up to 350 mm controller enclosure length
강철 면면 두께	1.0-1.5 mm 304 stainless steel faceplates
코어 밀도	7900-8030 kg/m³ for 304 stainless steel parts
열전도도 (Thermal Conductivity)	14-17 W/(m·K) for 304 stainless steel faceplates
표면 마무리	Brushed 304 stainless steel with green request and red locked indicators
접합 유형	Embedded two-door controller with quick-connect lock, contact, lamp and cycle terminals
사용자 정의	의도된 응용 프로그램 및 운영 환경에 따라 사용할 수 있습니다.

사용 가능한 옵션

Electric strike or magnetic lockPurge-cycle lock inputDoor-open buzzerFlush stainless indicator plates

Planning a Pass Box Interlock System specification?

치수, 설치 조건, 성능 목표 및 필요한 표면 마감을 보내십시오.

우리 팀과 대화하십시오.