İngilizce
Almanca
Arapça
Fransızca
Endonezya dilinde
Japonca
Korece
Malay dilinde
Portekizce
Rusça
İspanyolca
Taylandca
TürkçeCurrent
Vietnamca
Temiz Oda Kontrolü ve Çevre İzleme Sistemleri
Pass Box Interlock Sistemi
A compact paired-door interlock that keeps opposite pass box doors mutually exclusive and gives operators clear release, locked and door-open feedback.
- Mutually Exclusive Doors
- Compact Embedded Controller
- Door-Open Alarm
- Timed Opposite-Door Release
Ürün tanıtımı
The pass box interlock system is designed for two closely coupled transfer-hatch doors. Magnetic contacts confirm the actual door position, while compact electric strikes or electromagnetic locks enforce the interlock. Stainless pushbutton indicators on each side show whether the local door is available, occupied or locked. A release delay can be added after closure, and optional germicidal-cycle or purge-ready inputs can hold both doors locked while the pass box completes its internal sequence.
Ana Özellikler
Door contacts verify physical closure instead of relying only on the lock command.
Illuminated stainless buttons communicate local request and availability at both sides.
Optional cycle input keeps both doors secured during purge or internal treatment operation.
Müşteri Ürün Sorunları
A pass box interlock must fit a compact enclosure and tolerate frequent door cycles while protecting the transfer boundary.
One door appears closed but the latch has not fully seated.A dedicated magnetic contact confirms actual closure before the opposite lock releases.
Operators on opposite sides cannot see which door is being used.Local illuminated indicators show available, occupied and alarm states on both faces.
Door slamming causes contacts to bounce and the opposite lock to chatter.Input debounce and a short release delay stabilize the sequence after closure.
A purge or treatment cycle is interrupted by an early door request.A cycle-hold input locks both doors until the pass box confirms completion.
Tipik uygulamalar
Static transfer hatchesDynamic pass boxesSterile material transferLaboratory specimen pass-throughs
Teknik parametreler
Typical materials and dimensions for a compact pass box door interlock controller are shown below.
| Temel malzemeler | Stainless steel faceplates with FR-4 interlock board, copper relays and flame-retardant polymer terminals |
|---|---|
| Panel kalınlığı | 35-90 mm embedded controller depth |
| Effective Width (Etkili Genişlik) | 100-250 mm controller or faceplate width |
| Maksimum uzunluk | Up to 350 mm controller enclosure length |
| Çelik yüz yüze kalınlığı | 1.0-1.5 mm 304 stainless steel faceplates |
| Core Density (Çekirdek Yoğunluğu) | 7900-8030 kg/m³ for 304 stainless steel parts |
| Termal İletkenlik | 14-17 W/(m·K) for 304 stainless steel faceplates |
| Yüzey bitirme | Brushed 304 stainless steel with green request and red locked indicators |
| Ortak tip | Embedded two-door controller with quick-connect lock, contact, lamp and cycle terminals |
| Customization (Özelleşme) | Kullanılan uygulama ve çalışma ortamına göre kullanılabilir. |
Mevcut Seçenekler
Electric strike or magnetic lockPurge-cycle lock inputKapı açılır zilFlush stainless indicator plates
Planning a Pass Box Interlock System specification?
Bize boyutlarınızı, montaj koşullarınızı, performans hedeflerinizi ve gerekli yüzey kaplamalarınızı gönderin.
