English
الألمانية
العربيةالحالي
الفرنسية
الإندونيسية
اليابانية
الكورية
اللغة الملاوية
البرتغالية
الروسية
الإسبانية
التايلاندية
اللغة التركية
اللغة الفيتنامية
أنظمة الجدار والسقف للغرفة النظيفة
لوحة السقف وحدات غرفة الأبحاث
A lightweight suspended ceiling module with an aluminum honeycomb core, smooth coated-steel underside and four-side framing for accurate installation around lights, filters and access components.
- Lightweight Ceiling Module
- Aluminum Honeycomb Core
- Factory Service Cut-Outs
- Four-Side Suspension Frame
مقدمة المنتج
The Modular Cleanroom Ceiling Panel uses expanded aluminum honeycomb to support a broad steel surface with low overhead mass. An aluminum perimeter frame closes the cellular core and provides precise bearing points within the suspended ceiling system. The room-side skin remains smooth and non-shedding, while prepared apertures receive lighting, HEPA housings, diffusers and monitoring devices. Standard modules are intended for supported ceiling grids rather than routine foot traffic, making them efficient for facilities that use separate access walkways above the ceiling.
الخصائص الرئيسية
Low module weight reduces dead load on the suspension structure.
The metallic core contains no loose mineral fibres above the controlled space.
Perimeter extrusions protect every cut edge and register accurately in the ceiling grid.
Prepared apertures reduce drilling debris when filters and luminaires are installed.
مخاوف المنتج للعملاء
Ceiling selection commonly focuses on overhead weight, panel sag, clean service openings and access strategy above the room.
Heavy ceiling infill increases the demand on hangers and primary steelwork.An aluminum honeycomb core provides a stiff surface with comparatively low mass.
Field-cut filter and light openings can leave sharp, exposed cellular edges.Factory-framed apertures close the core and present finished bearing surfaces for equipment.
Large unsupported faces may show ripples under bright cleanroom lighting.Uniform honeycomb support maintains close contact with the room-side skin across the module.
Personnel may accidentally treat a standard ceiling tile as an access platform.A separate service walkway and clearly defined access points keep foot loads off non-walkable modules.
تطبيقات نموذجية
أشباه الموصلات غرف الأبحاث السقوفPharmaceutical packaging roomsResearch laboratory ceilingsمناطق التفتيش على الأجهزة الطبيةControlled assembly spaces with separate service walkways
المعلمات الفنية
These dimensions describe a lightweight aluminum-honeycomb panel for a supported modular cleanroom ceiling.
| المواد الأساسية | 3003-series aluminum honeycomb with four-side aluminum frame |
|---|---|
| سمك اللوحة | 50 mm |
| العرض الفعال | 1200 mm |
| الحد الأقصى الطول | 3000 mm |
| الصلب يواجه سمك | 0.50 mm |
| الكثافة الأساسية | Approximately 27 kg/m³ |
| الموصلية الحرارية | 0.11–0.15 W/(m·K) |
| إنهاء السطح | PVC-laminated, polyester-coated or PET-faced galvanized steel |
| نوع المشترك | Four-side aluminum frame with PVC or aluminum cruciform tongue |
| التخصيص | Module sizes and factory cut-outs are available for the intended ceiling layout and equipment mix |
الخيارات المتاحة
HEPA filter and light fixture aperturesPVC, PET or polyester room-side finishRemovable access hatch moduleMatching suspension profiles and hanger hardware
Planning a Modular Cleanroom Ceiling Panel specification?
أرسل لنا الأبعاد الخاصة بك، شروط التثبيت، أهداف الأداء والتشطيب السطحي المطلوب.
