Inglés
Alemán
El árabe
Francés
Idioma indonesio
El japonés
Coreano
El malayo
El portugués
El ruso
EspañolCurrent
Tailandés
El turco
El vietnamita
Sistemas de pared y techo de sala limpia
Panel de techo de sala limpia modular
A lightweight suspended ceiling module with an aluminum honeycomb core, smooth coated-steel underside and four-side framing for accurate installation around lights, filters and access components.
- Lightweight Ceiling Module
- Aluminum Honeycomb Core
- Factory Service Cut-Outs
- Four-Side Suspension Frame
Introducción del producto
The Modular Cleanroom Ceiling Panel uses expanded aluminum honeycomb to support a broad steel surface with low overhead mass. An aluminum perimeter frame closes the cellular core and provides precise bearing points within the suspended ceiling system. The room-side skin remains smooth and non-shedding, while prepared apertures receive lighting, HEPA housings, diffusers and monitoring devices. Standard modules are intended for supported ceiling grids rather than routine foot traffic, making them efficient for facilities that use separate access walkways above the ceiling.
Características clave
Low module weight reduces dead load on the suspension structure.
The metallic core contains no loose mineral fibres above the controlled space.
Perimeter extrusions protect every cut edge and register accurately in the ceiling grid.
Prepared apertures reduce drilling debris when filters and luminaires are installed.
Preocupaciones del producto del cliente
Ceiling selection commonly focuses on overhead weight, panel sag, clean service openings and access strategy above the room.
Heavy ceiling infill increases the demand on hangers and primary steelwork.An aluminum honeycomb core provides a stiff surface with comparatively low mass.
Field-cut filter and light openings can leave sharp, exposed cellular edges.Factory-framed apertures close the core and present finished bearing surfaces for equipment.
Large unsupported faces may show ripples under bright cleanroom lighting.Uniform honeycomb support maintains close contact with the room-side skin across the module.
Personnel may accidentally treat a standard ceiling tile as an access platform.A separate service walkway and clearly defined access points keep foot loads off non-walkable modules.
Aplicaciones típicas
Semiconductores Cleanroom TechoPharmaceutical packaging roomsResearch laboratory ceilingsÁreas de inspección de dispositivos médicosControlled assembly spaces with separate service walkways
Parámetros técnicos
These dimensions describe a lightweight aluminum-honeycomb panel for a supported modular cleanroom ceiling.
| Materiales Core | 3003-series aluminum honeycomb with four-side aluminum frame |
|---|---|
| Panel de espesor | 50 mm |
| Ancho efectivo | 1200 mm |
| Longitud máxima | 3000 mm |
| Acero frente a espesor | 0.50 mm |
| Densidad Core | Approximately 27 kg/m³ |
| Conductividad térmica | 0.11–0.15 W/(m·K) |
| Superficie acabada | PVC-laminated, polyester-coated or PET-faced galvanized steel |
| Tipo conjunto | Four-side aluminum frame with PVC or aluminum cruciform tongue |
| Customization | Module sizes and factory cut-outs are available for the intended ceiling layout and equipment mix |
Opciones disponibles
HEPA filter and light fixture aperturesPVC, PET or polyester room-side finishRemovable access hatch moduleMatching suspension profiles and hanger hardware
Planning a Modular Cleanroom Ceiling Panel specification?
Envíenos sus dimensiones, condiciones de instalación, objetivos de rendimiento y acabado superficial requerido.
