English
الألمانية
العربيةالحالي
الفرنسية
الإندونيسية
اليابانية
الكورية
اللغة الملاوية
البرتغالية
الروسية
الإسبانية
التايلاندية
اللغة التركية
اللغة الفيتنامية
ملابس الغرف النظيفة، PPE والمواد الاستهلاكية
مناديل غرف الأبحاث الميكروفيبر
Soft split-microfiber cleanroom wipes engineered for efficient particle capture, liquid sorption and low-abrasion cleaning of precision surfaces.
- Split microfiber structure improves fine-particle and residue pickup
- Dense soft face supports cleaning of delicate controlled surfaces
- High sorbency helps meter solution across broader wiping areas
مقدمة المنتج
Microfiber Cleanroom Wipes combine fine polyester and polyamide filaments in a split-fiber structure that increases contact area with the surface. The dense fabric captures fine particles and oily films while distributing cleaning solution more evenly than many conventional nonwoven wipes. A pale-blue color provides practical contrast against light-colored residue without introducing printed markings or loose colored fibers.
الخصائص الرئيسية
Dense low-lint fabric captures fine debris within the fiber structure
Soft wiping face suits glass, polished metal and sensitive equipment panels
High sorptive capacity supports controlled wet wiping and wiping-to-dry
Ultrasonically cut or sealed edges reduce loose perimeter fibers
مخاوف المنتج للعملاء
Fine contamination can remain after a visually clean surface has been wiped. Operators also need a fabric that removes films without scratching delicate finishes or releasing excess solvent.
Conventional wipes may push small particles rather than retain them.Use split microfiber to increase particle-capture area and capillary action.
Coarse fabric can mark polished or optical surfaces.Specify a dense soft face with no abrasive mesh or exposed hard component.
Uneven liquid release can leave streaks and wet patches.Match fabric weight and sorbency to the solution volume used in the procedure.
Thick fabric may trap residual chemistry if it is not folded and changed correctly.Provide suitable sheet size and folding guidance so fresh wiping faces are exposed in sequence.
تطبيقات نموذجية
Suitable for cleaning glass, stainless steel, isolator surfaces, optics, equipment touchpoints and precision components in pharmaceutical, biotechnology, medical-device, display and electronics production.
المعلمات الفنية
The following ranges cover common cleanroom-compatible split-microfiber wipes. Fabric blend, weight, edge method and laundering level can be selected for the target surface and contamination type.
| المواد الأساسية | Split microfiber blend of polyester and polyamide |
|---|---|
| سمك اللوحة | 0.45–0.80 mm |
| العرض الفعال | 150–310 mm |
| الحد الأقصى الطول | 310 mm |
| الصلب يواجه سمك | 0 mm; no steel facing used |
| الكثافة الأساسية | 130–220 kg/m³ apparent fabric density |
| الموصلية الحرارية | 0.04–0.07 W/(m·K), fabric dependent |
| إنهاء السطح | Pale-blue dense microfiber wiping face |
| نوع المشترك | Ultrasonically cut or sealed perimeter edge |
| التخصيص | متوفر على أساس التطبيق المقصود وبيئة التشغيل. |
الخيارات المتاحة
White or pale-blue fabricPolyester/polyamide blend selected for pickup and sorbency150 mm, 230 mm or 310 mm square sheetsDry or pre-saturated supplySealed-edge configurationDouble-bagged or sterile packaging
Planning a Microfiber Cleanroom Wipes specification?
أرسل لنا الأبعاد الخاصة بك، شروط التثبيت، أهداف الأداء والتشطيب السطحي المطلوب.
