Anglais
Allemand
Arabe
FrançaisCurrent
Indonésien
Japonais
Coréen
Le malais
Le portugais
russe
espagnol
Thaïlandais
Le turc
Le vietnamien
Vêtements de salle blanche, EPI et consommables
Z Microfiber Cleanroom Wipes
Soft split-microfiber cleanroom wipes engineered for efficient particle capture, liquid sorption and low-abrasion cleaning of precision surfaces.
- Split microfiber structure improves fine-particle and residue pickup
- Dense soft face supports cleaning of delicate controlled surfaces
- High sorbency helps meter solution across broader wiping areas
Introduction de produit
Microfiber Cleanroom Wipes combine fine polyester and polyamide filaments in a split-fiber structure that increases contact area with the surface. The dense fabric captures fine particles and oily films while distributing cleaning solution more evenly than many conventional nonwoven wipes. A pale-blue color provides practical contrast against light-colored residue without introducing printed markings or loose colored fibers.
Key Features
Dense low-lint fabric captures fine debris within the fiber structure
Soft wiping face suits glass, polished metal and sensitive equipment panels
High sorptive capacity supports controlled wet wiping and wiping-to-dry
Ultrasonically cut or sealed edges reduce loose perimeter fibers
Préoccupations du client produit
Fine contamination can remain after a visually clean surface has been wiped. Operators also need a fabric that removes films without scratching delicate finishes or releasing excess solvent.
Conventional wipes may push small particles rather than retain them.Use split microfiber to increase particle-capture area and capillary action.
Coarse fabric can mark polished or optical surfaces.Specify a dense soft face with no abrasive mesh or exposed hard component.
Uneven liquid release can leave streaks and wet patches.Match fabric weight and sorbency to the solution volume used in the procedure.
Thick fabric may trap residual chemistry if it is not folded and changed correctly.Provide suitable sheet size and folding guidance so fresh wiping faces are exposed in sequence.
Les applications typiques
Suitable for cleaning glass, stainless steel, isolator surfaces, optics, equipment touchpoints and precision components in pharmaceutical, biotechnology, medical-device, display and electronics production.
Paramètres techniques
The following ranges cover common cleanroom-compatible split-microfiber wipes. Fabric blend, weight, edge method and laundering level can be selected for the target surface and contamination type.
| Matériaux de base | Split microfiber blend of polyester and polyamide |
|---|---|
| Panneau épaisseur | 0.45–0.80 mm |
| Largeur effective | 150–310 mm |
| Longueur maximale | 310 mm |
| Acier face épaisseur | 0 mm; no steel facing used |
| Densité Core | 130–220 kg/m³ apparent fabric density |
| Conductivité thermique | 0.04–0.07 W/(m·K), fabric dependent |
| surface finie | Pale-blue dense microfiber wiping face |
| Type joint | Ultrasonically cut or sealed perimeter edge |
| Customisation | Disponible en fonction de l'application prévue et de l'environnement d'exploitation. |
Options disponibles
White or pale-blue fabricPolyester/polyamide blend selected for pickup and sorbency150 mm, 230 mm or 310 mm square sheetsDry or pre-saturated supplySealed-edge configurationDouble-bagged or sterile packaging
Planning a Microfiber Cleanroom Wipes specification?
Envoyez-nous vos dimensions, conditions d'installation, objectifs de performance et finition de surface requise.
