English
Немецкий
Арабский язык
Французский
Индонезийский
Японский язык
Корейский
Японский
Португальский
Русский языкТекущий
Испанский язык
Тайский
Турецкий
Вьетнамский язык
Одежда для чистых комнат, ИПП и расходные материалы
Микроволокна чистые помещения
Soft split-microfiber cleanroom wipes engineered for efficient particle capture, liquid sorption and low-abrasion cleaning of precision surfaces.
- Split microfiber structure improves fine-particle and residue pickup
- Dense soft face supports cleaning of delicate controlled surfaces
- High sorbency helps meter solution across broader wiping areas
Введение продукции
Microfiber Cleanroom Wipes combine fine polyester and polyamide filaments in a split-fiber structure that increases contact area with the surface. The dense fabric captures fine particles and oily films while distributing cleaning solution more evenly than many conventional nonwoven wipes. A pale-blue color provides practical contrast against light-colored residue without introducing printed markings or loose colored fibers.
Основные характеристики
Dense low-lint fabric captures fine debris within the fiber structure
Soft wiping face suits glass, polished metal and sensitive equipment panels
High sorptive capacity supports controlled wet wiping and wiping-to-dry
Ultrasonically cut or sealed edges reduce loose perimeter fibers
Обеспокоенность клиентов продуктами
Fine contamination can remain after a visually clean surface has been wiped. Operators also need a fabric that removes films without scratching delicate finishes or releasing excess solvent.
Conventional wipes may push small particles rather than retain them.Use split microfiber to increase particle-capture area and capillary action.
Coarse fabric can mark polished or optical surfaces.Specify a dense soft face with no abrasive mesh or exposed hard component.
Uneven liquid release can leave streaks and wet patches.Match fabric weight and sorbency to the solution volume used in the procedure.
Thick fabric may trap residual chemistry if it is not folded and changed correctly.Provide suitable sheet size and folding guidance so fresh wiping faces are exposed in sequence.
Типичные приложения
Suitable for cleaning glass, stainless steel, isolator surfaces, optics, equipment touchpoints and precision components in pharmaceutical, biotechnology, medical-device, display and electronics production.
Технические параметры
The following ranges cover common cleanroom-compatible split-microfiber wipes. Fabric blend, weight, edge method and laundering level can be selected for the target surface and contamination type.
| Основной материал | Split microfiber blend of polyester and polyamide |
|---|---|
| Толщина панели | 0.45–0.80 mm |
| эффективная ширина | 150–310 mm |
| Максимальная длина | 310 mm |
| Толщина линий стали | 0 mm; no steel facing used |
| Плотность ядра | 130–220 kg/m³ apparent fabric density |
| Теплопроводимость | 0.04–0.07 W/(m·K), fabric dependent |
| Поверхностная отделка | Pale-blue dense microfiber wiping face |
| Объединенный тип | Ultrasonically cut or sealed perimeter edge |
| Customization | Доступно в зависимости от предполагаемого применения и операционной среды. |
Доступные варианты
White or pale-blue fabricPolyester/polyamide blend selected for pickup and sorbency150 mm, 230 mm or 310 mm square sheetsDry or pre-saturated supplySealed-edge configurationDouble-bagged or sterile packaging
Planning a Microfiber Cleanroom Wipes specification?
Отправьте нам ваши габариты, условия монтажа, целевые показатели производительности и требуемую отделку поверхности.
