클린룸 의류, PPE 및 소모품

Microfiber Cleanroom Wipes

Soft split-microfiber cleanroom wipes engineered for efficient particle capture, liquid sorption and low-abrasion cleaning of precision surfaces.

Split microfiber structure improves fine-particle and residue pickup
Dense soft face supports cleaning of delicate controlled surfaces
High sorbency helps meter solution across broader wiping areas

견적 요청 제품 찾아보기

상품 소개

Microfiber Cleanroom Wipes combine fine polyester and polyamide filaments in a split-fiber structure that increases contact area with the surface. The dense fabric captures fine particles and oily films while distributing cleaning solution more evenly than many conventional nonwoven wipes. A pale-blue color provides practical contrast against light-colored residue without introducing printed markings or loose colored fibers.

주요 기능

Split polyester/polyamide microfibers increase effective surface contact

Dense low-lint fabric captures fine debris within the fiber structure

Soft wiping face suits glass, polished metal and sensitive equipment panels

High sorptive capacity supports controlled wet wiping and wiping-to-dry

Ultrasonically cut or sealed edges reduce loose perimeter fibers

고객 제품 관심사

Fine contamination can remain after a visually clean surface has been wiped. Operators also need a fabric that removes films without scratching delicate finishes or releasing excess solvent.

Conventional wipes may push small particles rather than retain them.Use split microfiber to increase particle-capture area and capillary action.

Coarse fabric can mark polished or optical surfaces.Specify a dense soft face with no abrasive mesh or exposed hard component.

Uneven liquid release can leave streaks and wet patches.Match fabric weight and sorbency to the solution volume used in the procedure.

Thick fabric may trap residual chemistry if it is not folded and changed correctly.Provide suitable sheet size and folding guidance so fresh wiping faces are exposed in sequence.

일반적인 응용 프로그램

Suitable for cleaning glass, stainless steel, isolator surfaces, optics, equipment touchpoints and precision components in pharmaceutical, biotechnology, medical-device, display and electronics production.

기술 매개변수

The following ranges cover common cleanroom-compatible split-microfiber wipes. Fabric blend, weight, edge method and laundering level can be selected for the target surface and contamination type.

핵심 재료	Split microfiber blend of polyester and polyamide
패널 두께	0.45–0.80 mm
유효 폭	150–310 mm
최대 길이	310 mm
강철 면면 두께	0 mm, 강철 면재 사용 없음
코어 밀도	130–220 kg/m³ apparent fabric density
열전도도 (Thermal Conductivity)	0.04–0.07 W/(m·K), fabric dependent
표면 마무리	Pale-blue dense microfiber wiping face
접합 유형	Ultrasonically cut or sealed perimeter edge
사용자 정의	의도된 응용 프로그램 및 운영 환경에 따라 사용할 수 있습니다.

사용 가능한 옵션

White or pale-blue fabricPolyester/polyamide blend selected for pickup and sorbency150 mm, 230 mm or 310 mm square sheetsDry or pre-saturated supplySealed-edge configurationDouble-bagged or sterile packaging

Planning a Microfiber Cleanroom Wipes specification?

치수, 설치 조건, 성능 목표 및 필요한 표면 마감을 보내십시오.

우리 팀과 대화하십시오.