English
الألمانية
العربيةالحالي
الفرنسية
الإندونيسية
اليابانية
الكورية
اللغة الملاوية
البرتغالية
الروسية
الإسبانية
التايلاندية
اللغة التركية
اللغة الفيتنامية
إضاءة الغرف النظيفة والمعدات الكهربائية
IP تصنيف غرفة نظيفة ضوء
A water- and dust-resistant LED fixture for controlled areas that combine hygienic cleaning with occasional spray or high humidity.
- Sealed Optical Chamber
- Washdown-Ready Exterior
- Stainless Captive Fasteners
- Gasketed Cable Connection
مقدمة المنتج
This fixture uses a robust lens frame, closed-cell perimeter gasket and protected cable connection to resist the entry of cleaning water and airborne dust. Its room-side hardware is stainless or concealed, while the lens sits smooth-side out for easy wiping. The enclosure can be supplied in coated steel, aluminum or stainless steel to suit the expected cleaning chemistry and condensation exposure.
الخصائص الرئيسية
Smooth-side-out lens orientation avoids deep exterior prisms.
Stainless captive hardware resists corrosion during repeated damp cleaning.
A gasketed conduit plate or cable gland closes the wiring route.
Internal drainage-free geometry keeps the room-side surface free of pockets.
مخاوف المنتج للعملاء
Moisture resistance depends on the complete enclosure, not merely on using a waterproof LED board inside an open fixture.
Cleaning spray enters around an ordinary hinged lens door.A continuous compressed gasket closes the complete optical perimeter.
Zinc-plated screws discolor after repeated disinfectant exposure.Stainless captive hardware protects the exposed fastening points.
Water follows the supply cable through an open knockout.A correctly sized compression gland seals around the cable sheath.
Deep lens ribs hold droplets and residue.The smooth optical surface faces the room for direct drying and wiping.
تطبيقات نموذجية
Washdown clean areasFood and beverage clean zonesHumid process roomsPharmaceutical utility corridors
المعلمات الفنية
Typical configurable construction ranges for an IP-rated cleanroom LED luminaire are listed below.
| المواد الأساسية | Coated steel, aluminum or stainless enclosure with LED modules and impact-resistant polycarbonate optic |
|---|---|
| سمك اللوحة | 70-140 mm enclosure depth |
| العرض الفعال | 150-650 mm exposed fixture width |
| الحد الأقصى الطول | Up to 1500 mm overall luminaire length |
| الصلب يواجه سمك | 0.9-1.5 mm coated or stainless sheet-metal housing |
| الكثافة الأساسية | Approximately 1200 kg/m³ for the polycarbonate optical cover |
| الموصلية الحرارية | 0.20-0.22 W/(m·K) for the polycarbonate lens |
| إنهاء السطح | Smooth white powder coat or brushed stainless steel with clear or opal polymer lens |
| نوع المشترك | Compression-gasketed optical frame with stainless captive fasteners and sealed conduit or cable entry |
| التخصيص | متوفر على أساس التطبيق المقصود وبيئة التشغيل. |
الخيارات المتاحة
Surface or recessed mountingPolycarbonate or tempered-glass lensHigh-humidity driver packageStainless steel enclosure
Planning a IP-Rated Cleanroom Light specification?
أرسل لنا الأبعاد الخاصة بك، شروط التثبيت، أهداف الأداء والتشطيب السطحي المطلوب.
