Inglés
Alemán
El árabe
Francés
Idioma indonesio
El japonés
Coreano
El malayo
El portugués
El ruso
EspañolCurrent
Tailandés
El turco
El vietnamita
Iluminación de sala limpia y equipos eléctricos
Luz de sala limpia IP
A water- and dust-resistant LED fixture for controlled areas that combine hygienic cleaning with occasional spray or high humidity.
- Sealed Optical Chamber
- Washdown-Ready Exterior
- Stainless Captive Fasteners
- Gasketed Cable Connection
Introducción del producto
This fixture uses a robust lens frame, closed-cell perimeter gasket and protected cable connection to resist the entry of cleaning water and airborne dust. Its room-side hardware is stainless or concealed, while the lens sits smooth-side out for easy wiping. The enclosure can be supplied in coated steel, aluminum or stainless steel to suit the expected cleaning chemistry and condensation exposure.
Características clave
Smooth-side-out lens orientation avoids deep exterior prisms.
Stainless captive hardware resists corrosion during repeated damp cleaning.
A gasketed conduit plate or cable gland closes the wiring route.
Internal drainage-free geometry keeps the room-side surface free of pockets.
Preocupaciones del producto del cliente
Moisture resistance depends on the complete enclosure, not merely on using a waterproof LED board inside an open fixture.
Cleaning spray enters around an ordinary hinged lens door.A continuous compressed gasket closes the complete optical perimeter.
Zinc-plated screws discolor after repeated disinfectant exposure.Stainless captive hardware protects the exposed fastening points.
Water follows the supply cable through an open knockout.A correctly sized compression gland seals around the cable sheath.
Deep lens ribs hold droplets and residue.The smooth optical surface faces the room for direct drying and wiping.
Aplicaciones típicas
Washdown clean areasFood and beverage clean zonesHumid process roomsPharmaceutical utility corridors
Parámetros técnicos
Typical configurable construction ranges for an IP-rated cleanroom LED luminaire are listed below.
| Materiales Core | Coated steel, aluminum or stainless enclosure with LED modules and impact-resistant polycarbonate optic |
|---|---|
| Panel de espesor | 70-140 mm enclosure depth |
| Ancho efectivo | 150-650 mm exposed fixture width |
| Longitud máxima | Up to 1500 mm overall luminaire length |
| Acero frente a espesor | 0.9-1.5 mm coated or stainless sheet-metal housing |
| Densidad Core | Approximately 1200 kg/m³ for the polycarbonate optical cover |
| Conductividad térmica | 0.20-0.22 W/(m·K) for the polycarbonate lens |
| Superficie acabada | Smooth white powder coat or brushed stainless steel with clear or opal polymer lens |
| Tipo conjunto | Compression-gasketed optical frame with stainless captive fasteners and sealed conduit or cable entry |
| Customization | Disponible según la aplicación prevista y el entorno operativo. |
Opciones disponibles
Surface or recessed mountingPolycarbonate or tempered-glass lensHigh-humidity driver packageStainless steel enclosure
Planning a IP-Rated Cleanroom Light specification?
Envíenos sus dimensiones, condiciones de instalación, objetivos de rendimiento y acabado superficial requerido.
