Temiz Oda Ekipmanları ve Aseptik Tesis Temelleri için Tek Duraklı TedarikçinizUluslararası Proje Destekleri
Open mobile navigationClose mobile navigation
Temiz Oda Aydınlatma ve Elektrik Ekipmanları

IP-Rated Temiz Oda Işığı

A water- and dust-resistant LED fixture for controlled areas that combine hygienic cleaning with occasional spray or high humidity.
  • Sealed Optical Chamber
  • Washdown-Ready Exterior
  • Stainless Captive Fasteners
  • Gasketed Cable Connection
Alıntı isteği Browse ürünleri

Ürün tanıtımı

This fixture uses a robust lens frame, closed-cell perimeter gasket and protected cable connection to resist the entry of cleaning water and airborne dust. Its room-side hardware is stainless or concealed, while the lens sits smooth-side out for easy wiping. The enclosure can be supplied in coated steel, aluminum or stainless steel to suit the expected cleaning chemistry and condensation exposure.

Ana Özellikler

A continuous molded or closed-cell gasket seals the optical door against the housing.

Smooth-side-out lens orientation avoids deep exterior prisms.

Stainless captive hardware resists corrosion during repeated damp cleaning.

A gasketed conduit plate or cable gland closes the wiring route.

Internal drainage-free geometry keeps the room-side surface free of pockets.

Müşteri Ürün Sorunları

Moisture resistance depends on the complete enclosure, not merely on using a waterproof LED board inside an open fixture.

Cleaning spray enters around an ordinary hinged lens door.A continuous compressed gasket closes the complete optical perimeter.
Zinc-plated screws discolor after repeated disinfectant exposure.Stainless captive hardware protects the exposed fastening points.
Water follows the supply cable through an open knockout.A correctly sized compression gland seals around the cable sheath.
Deep lens ribs hold droplets and residue.The smooth optical surface faces the room for direct drying and wiping.

Tipik uygulamalar

Washdown clean areasFood and beverage clean zonesHumid process roomsPharmaceutical utility corridors

Teknik parametreler

Typical configurable construction ranges for an IP-rated cleanroom LED luminaire are listed below.

Temel malzemelerCoated steel, aluminum or stainless enclosure with LED modules and impact-resistant polycarbonate optic
Panel kalınlığı70-140 mm enclosure depth
Effective Width (Etkili Genişlik)150-650 mm exposed fixture width
Maksimum uzunlukUp to 1500 mm overall luminaire length
Çelik yüz yüze kalınlığı0.9-1.5 mm coated or stainless sheet-metal housing
Core Density (Çekirdek Yoğunluğu)Approximately 1200 kg/m³ for the polycarbonate optical cover
Termal İletkenlik0.20-0.22 W/(m·K) for the polycarbonate lens
Yüzey bitirmeSmooth white powder coat or brushed stainless steel with clear or opal polymer lens
Ortak tipCompression-gasketed optical frame with stainless captive fasteners and sealed conduit or cable entry
Customization (Özelleşme)Kullanılan uygulama ve çalışma ortamına göre kullanılabilir.

Mevcut Seçenekler

Surface or recessed mountingPolycarbonate or tempered-glass lensHigh-humidity driver packageStainless steel enclosure

Planning a IP-Rated Cleanroom Light specification?

Bize boyutlarınızı, montaj koşullarınızı, performans hedeflerinizi ve gerekli yüzey kaplamalarınızı gönderin.

Ekibimizle konuşun
E-posta Bize whatsapp WeChat

Ana Sayfa

Ürünler

Haberler

Hakkımızda

İletişim