IP-rated cleanroom LED luminaire with sealed white housing and opal lens

クリーンルーム照明 · 電気機器

IP 定格クリーンルームライト

A water- and dust-resistant LED fixture for controlled areas that combine hygienic cleaning with occasional spray or high humidity.

Sealed Optical Chamber
Washdown-Ready Exterior
Stainless Captive Fasteners
Gasketed Cable Connection

見積もりリクエスト製品案内

商品紹介

This fixture uses a robust lens frame, closed-cell perimeter gasket and protected cable connection to resist the entry of cleaning water and airborne dust. Its room-side hardware is stainless or concealed, while the lens sits smooth-side out for easy wiping. The enclosure can be supplied in coated steel, aluminum or stainless steel to suit the expected cleaning chemistry and condensation exposure.

主要な特徴

A continuous molded or closed-cell gasket seals the optical door against the housing.

Smooth-side-out lens orientation avoids deep exterior prisms.

Stainless captive hardware resists corrosion during repeated damp cleaning.

A gasketed conduit plate or cable gland closes the wiring route.

Internal drainage-free geometry keeps the room-side surface free of pockets.

お客様の製品に関する懸念事項

Moisture resistance depends on the complete enclosure, not merely on using a waterproof LED board inside an open fixture.

Cleaning spray enters around an ordinary hinged lens door.A continuous compressed gasket closes the complete optical perimeter.

Zinc-plated screws discolor after repeated disinfectant exposure.Stainless captive hardware protects the exposed fastening points.

Water follows the supply cable through an open knockout.A correctly sized compression gland seals around the cable sheath.

Deep lens ribs hold droplets and residue.The smooth optical surface faces the room for direct drying and wiping.

典型的な用途

Washdown clean areasFood and beverage clean zonesHumid process roomsPharmaceutical utility corridors

技術的なパラメータ

Typical configurable construction ranges for an IP-rated cleanroom LED luminaire are listed below.

コア材料	Coated steel, aluminum or stainless enclosure with LED modules and impact-resistant polycarbonate optic
パネルの厚さ	70-140 mm enclosure depth
有効幅	150-650 mm exposed fixture width
最大長さ	Up to 1500 mm overall luminaire length
鋼鉄の厚さを直面する	0.9-1.5 mm coated or stainless sheet-metal housing
コア密度	Approximately 1200 kg/m³ for the polycarbonate optical cover
熱伝導率	0.20-0.22 W/(m·K) for the polycarbonate lens
表面仕上げ	Smooth white powder coat or brushed stainless steel with clear or opal polymer lens
ジョイントタイプ	Compression-gasketed optical frame with stainless captive fasteners and sealed conduit or cable entry
カスタマイズ	意図したアプリケーションと動作環境に基づいて利用できます。

利用可能なオプション

Surface or recessed mountingPolycarbonate or tempered-glass lensHigh-humidity driver packageStainless steel enclosure

Planning a IP-Rated Cleanroom Light specification?

寸法、設置条件、性能目標、必要な表面仕上げをお送りください。

チームに相談する