English
الألمانية
العربيةالحالي
الفرنسية
الإندونيسية
اليابانية
الكورية
اللغة الملاوية
البرتغالية
الروسية
الإسبانية
التايلاندية
اللغة التركية
اللغة الفيتنامية
أنظمة التحكم في الغرف النظيفة والمراقبة البيئية
مستشعر الرطوبة
A capacitive relative-humidity sensor that measures cleanroom moisture with a protected sensing element and serviceable wall or duct housing.
- Capacitive RH Measurement
- Replaceable Sensor Filter
- Low-Drift Signal Conditioning
- Wall or Duct Format
مقدمة المنتج
The cleanroom humidity sensor uses a capacitive polymer element whose electrical response changes with water-vapor concentration. A protective membrane or porous filter shields the element from particles and incidental contact while allowing moisture diffusion. Signal conditioning linearizes and temperature-compensates the RH output for connection to environmental monitoring or HVAC controls. Wall versions use a compact ventilated enclosure; duct versions place a filtered probe into the airstream while keeping wiring accessible outside the duct.
الخصائص الرئيسية
A replaceable filter protects the sensitive element from dust and handling contamination.
Temperature compensation reduces humidity error caused by normal room-temperature variation.
Wall and duct formats place the same sensing principle at the appropriate measurement location.
مخاوف المنتج للعملاء
Humidity measurement is vulnerable to contamination, local condensation and unsuitable mounting locations that do not represent the room air.
Cleaning residue coats the humidity element and causes slow drift.A replaceable protective filter reduces direct contamination and simplifies service.
Condensation temporarily saturates the sensor after a cold-air event.A hydrophobic filter and appropriate probe placement reduce liquid-water contact.
A wall pocket measures stagnant air rather than the occupied zone.Ventilated housing and considered mounting height expose the element to representative circulation.
Long field wiring adds noise to a low-level sensor signal.Integrated active signal conditioning provides a robust current, voltage or digital output.
تطبيقات نموذجية
Cleanroom relative humidity monitoringAHU supply-air measurementStability roomsElectronics humidity control
المعلمات الفنية
Typical materials and dimensions for a cleanroom capacitive humidity sensor are listed below.
| المواد الأساسية | Capacitive polymer RH element with hydrophobic membrane in polycarbonate wall or probe housing |
|---|---|
| سمك اللوحة | 25-45 mm wall-sensor depth |
| العرض الفعال | 80-120 mm wall housing width |
| الحد الأقصى الطول | Duct probes up to 300 mm |
| الصلب يواجه سمك | 0-0.8 mm; optional stainless probe tube |
| الكثافة الأساسية | 1180-1220 kg/m³ for polycarbonate housing |
| الموصلية الحرارية | 0.19-0.22 W/(m·K) for polycarbonate enclosure material |
| إنهاء السطح | Smooth white wall housing or satin stainless probe with white electronics head |
| نوع المشترك | Snap-fit wall enclosure or threaded duct flange with replaceable filtered sensor cap |
| التخصيص | متوفر على أساس التطبيق المقصود وبيئة التشغيل. |
الخيارات المتاحة
Wall or duct probeVoltage, current or digital outputReplaceable membrane filterRemote probe cable
Planning a Humidity Sensor specification?
أرسل لنا الأبعاد الخاصة بك، شروط التثبيت، أهداف الأداء والتشطيب السطحي المطلوب.
