Anglais
Allemand
Arabe
FrançaisCurrent
Indonésien
Japonais
Coréen
Le malais
Le portugais
russe
espagnol
Thaïlandais
Le turc
Le vietnamien
Systèmes de contrôle des salles blanches et de surveillance environnementale
Sensor d'humidité
A capacitive relative-humidity sensor that measures cleanroom moisture with a protected sensing element and serviceable wall or duct housing.
- Capacitive RH Measurement
- Replaceable Sensor Filter
- Low-Drift Signal Conditioning
- Wall or Duct Format
Introduction de produit
The cleanroom humidity sensor uses a capacitive polymer element whose electrical response changes with water-vapor concentration. A protective membrane or porous filter shields the element from particles and incidental contact while allowing moisture diffusion. Signal conditioning linearizes and temperature-compensates the RH output for connection to environmental monitoring or HVAC controls. Wall versions use a compact ventilated enclosure; duct versions place a filtered probe into the airstream while keeping wiring accessible outside the duct.
Key Features
A replaceable filter protects the sensitive element from dust and handling contamination.
Temperature compensation reduces humidity error caused by normal room-temperature variation.
Wall and duct formats place the same sensing principle at the appropriate measurement location.
Préoccupations du client produit
Humidity measurement is vulnerable to contamination, local condensation and unsuitable mounting locations that do not represent the room air.
Cleaning residue coats the humidity element and causes slow drift.A replaceable protective filter reduces direct contamination and simplifies service.
Condensation temporarily saturates the sensor after a cold-air event.A hydrophobic filter and appropriate probe placement reduce liquid-water contact.
A wall pocket measures stagnant air rather than the occupied zone.Ventilated housing and considered mounting height expose the element to representative circulation.
Long field wiring adds noise to a low-level sensor signal.Integrated active signal conditioning provides a robust current, voltage or digital output.
Les applications typiques
Cleanroom relative humidity monitoringAHU supply-air measurementStability roomsElectronics humidity control
Paramètres techniques
Typical materials and dimensions for a cleanroom capacitive humidity sensor are listed below.
| Matériaux de base | Capacitive polymer RH element with hydrophobic membrane in polycarbonate wall or probe housing |
|---|---|
| Panneau épaisseur | 25-45 mm wall-sensor depth |
| Largeur effective | 80-120 mm wall housing width |
| Longueur maximale | Duct probes up to 300 mm |
| Acier face épaisseur | 0-0.8 mm; optional stainless probe tube |
| Densité Core | 1180-1220 kg/m³ for polycarbonate housing |
| Conductivité thermique | 0.19-0.22 W/(m·K) for polycarbonate enclosure material |
| surface finie | Smooth white wall housing or satin stainless probe with white electronics head |
| Type joint | Snap-fit wall enclosure or threaded duct flange with replaceable filtered sensor cap |
| Customisation | Disponible en fonction de l'application prévue et de l'environnement d'exploitation. |
Options disponibles
Wall or duct probeVoltage, current or digital outputReplaceable membrane filterRemote probe cable
Planning a Humidity Sensor specification?
Envoyez-nous vos dimensions, conditions d'installation, objectifs de performance et finition de surface requise.
