English
الألمانية
العربيةالحالي
الفرنسية
الإندونيسية
اليابانية
الكورية
اللغة الملاوية
البرتغالية
الروسية
الإسبانية
التايلاندية
اللغة التركية
اللغة الفيتنامية
أدوات اختبار الغرفة النظيفة والتحقق من صحتها
HEPA المسح الضوئي
An ergonomic isokinetic sampling probe for scanning HEPA filter media, frames and seals while displaying live photometer response at the operator's hand.
- Isokinetic inlet for systematic HEPA face scanning.
- Live response and controls at the operator's hand.
- Flexible ergonomic design for overhead filter work.
مقدمة المنتج
This HEPA scan probe combines a shaped isokinetic inlet, flexible neck, sample hose and photometer control interface in a balanced handheld assembly. It lets the operator maintain the correct inlet orientation and scanning distance while viewing penetration response directly at the filter face. Remote valve and alarm controls reduce trips back to the base photometer during systematic media, frame and gasket scans.
الخصائص الرئيسية
Flexible neck allows comfortable nozzle alignment near ceilings and corners.
Handheld display keeps live penetration and alarm status in the operator's sightline.
Remote sampling controls streamline upstream, downstream and clear-air selection.
Secure hose and electrical connections maintain continuity during overlapping scan strokes.
Ergonomic grip reduces fatigue during large filter-bank inspections.
مخاوف المنتج للعملاء
Effective filter scanning depends on stable inlet geometry, overlapping probe motion and continuous visibility of the photometer response.
Tilting the inlet during a scan can affect local sampling response.A shaped isokinetic nozzle and flexible neck make it easier to keep the inlet parallel to the filter face.
Looking away at a remote base unit can interrupt overlapping scan strokes.An integrated display and alarm indication keep essential response information at the probe.
Long overhead scans can cause wrist and shoulder fatigue.A balanced grip, lightweight neck and accessible controls support one-handed movement.
Loose hose or signal connections can invalidate a scan sequence.Positive-lock sample and electrical couplings resist movement during repeated passes.
تطبيقات نموذجية
Manual scanning of installed HEPA and ULPA filtersFilter frame and gasket leak localizationCleanroom ceiling filter qualificationشهادة مجلس الوزراء السلامة البيولوجيةScanning difficult overhead and corner locations
المعلمات الفنية
Typical construction values for handheld scan probes are listed below; inlet geometry, neck length and interface features can be selected for the photometer and filter layout.
| المواد الأساسية | Molded engineering-polymer handle, stainless sampling tube, flexible neck and isokinetic inlet nozzle |
|---|---|
| سمك اللوحة | Typically 2.0-3.5 mm for the molded handheld housing |
| العرض الفعال | Approximately 90-160 mm across the sampling inlet according to nozzle selection |
| الحد الأقصى الطول | Approximately 450-750 mm including flexible neck and inlet nozzle |
| الصلب يواجه سمك | Typically 0.8-1.5 mm for stainless sampling tube and nozzle components |
| الكثافة الأساسية | Approximately 7800-8000 kg/m³ for stainless sampling components |
| الموصلية الحرارية | Approximately 14-17 W/(m·K) for stainless sampling components |
| إنهاء السطح | Dark antistatic molded grip with satin stainless tube and blue rectangular inlet nozzle |
| نوع المشترك | Quick-connect aerosol hose fitting with locking circular electrical connector and interchangeable nozzle coupling |
| التخصيص | متوفر على أساس التطبيق المقصود وبيئة التشغيل. |
الخيارات المتاحة
Rectangular and round isokinetic nozzlesStandard or extended flexible neckColor touchscreen or compact indicatorDifferent umbilical lengthsLeft- and right-handed L-probe adaptersProtective carrying case
Planning a HEPA Scan Probe specification?
أرسل لنا الأبعاد الخاصة بك، شروط التثبيت، أهداف الأداء والتشطيب السطحي المطلوب.
