Inglés
Alemán
El árabe
Francés
Idioma indonesio
El japonés
Coreano
El malayo
El portugués
El ruso
EspañolCurrent
Tailandés
El turco
El vietnamita
Instrumentación de prueba y validación de sala limpia
Probe de escaneo HEPA
An ergonomic isokinetic sampling probe for scanning HEPA filter media, frames and seals while displaying live photometer response at the operator's hand.
- Isokinetic inlet for systematic HEPA face scanning.
- Live response and controls at the operator's hand.
- Flexible ergonomic design for overhead filter work.
Introducción del producto
This HEPA scan probe combines a shaped isokinetic inlet, flexible neck, sample hose and photometer control interface in a balanced handheld assembly. It lets the operator maintain the correct inlet orientation and scanning distance while viewing penetration response directly at the filter face. Remote valve and alarm controls reduce trips back to the base photometer during systematic media, frame and gasket scans.
Características clave
Flexible neck allows comfortable nozzle alignment near ceilings and corners.
Handheld display keeps live penetration and alarm status in the operator's sightline.
Remote sampling controls streamline upstream, downstream and clear-air selection.
Secure hose and electrical connections maintain continuity during overlapping scan strokes.
Ergonomic grip reduces fatigue during large filter-bank inspections.
Preocupaciones del producto del cliente
Effective filter scanning depends on stable inlet geometry, overlapping probe motion and continuous visibility of the photometer response.
Tilting the inlet during a scan can affect local sampling response.A shaped isokinetic nozzle and flexible neck make it easier to keep the inlet parallel to the filter face.
Looking away at a remote base unit can interrupt overlapping scan strokes.An integrated display and alarm indication keep essential response information at the probe.
Long overhead scans can cause wrist and shoulder fatigue.A balanced grip, lightweight neck and accessible controls support one-handed movement.
Loose hose or signal connections can invalidate a scan sequence.Positive-lock sample and electrical couplings resist movement during repeated passes.
Aplicaciones típicas
Manual scanning of installed HEPA and ULPA filtersFilter frame and gasket leak localizationCleanroom ceiling filter qualificationCertificación de Gabinete de Seguridad Biológica
porScanning difficult overhead and corner locations
Parámetros técnicos
Typical construction values for handheld scan probes are listed below; inlet geometry, neck length and interface features can be selected for the photometer and filter layout.
| Materiales Core | Molded engineering-polymer handle, stainless sampling tube, flexible neck and isokinetic inlet nozzle |
|---|---|
| Panel de espesor | Typically 2.0-3.5 mm for the molded handheld housing |
| Ancho efectivo | Approximately 90-160 mm across the sampling inlet according to nozzle selection |
| Longitud máxima | Approximately 450-750 mm including flexible neck and inlet nozzle |
| Acero frente a espesor | Typically 0.8-1.5 mm for stainless sampling tube and nozzle components |
| Densidad Core | Approximately 7800-8000 kg/m³ for stainless sampling components |
| Conductividad térmica | Approximately 14-17 W/(m·K) for stainless sampling components |
| Superficie acabada | Dark antistatic molded grip with satin stainless tube and blue rectangular inlet nozzle |
| Tipo conjunto | Quick-connect aerosol hose fitting with locking circular electrical connector and interchangeable nozzle coupling |
| Customization | Disponible según la aplicación prevista y el entorno operativo. |
Opciones disponibles
Rectangular and round isokinetic nozzlesStandard or extended flexible neckColor touchscreen or compact indicatorDifferent umbilical lengthsLeft- and right-handed L-probe adaptersProtective carrying case
Planning a HEPA Scan Probe specification?
Envíenos sus dimensiones, condiciones de instalación, objetivos de rendimiento y acabado superficial requerido.
