HEPA scan probe in three-quarter full view on a white background

클린룸 테스트 및 검증 장비

HEPA 스캔 프로브

An ergonomic isokinetic sampling probe for scanning HEPA filter media, frames and seals while displaying live photometer response at the operator's hand.

Isokinetic inlet for systematic HEPA face scanning.
Live response and controls at the operator's hand.
Flexible ergonomic design for overhead filter work.

견적 요청 제품 찾아보기

상품 소개

This HEPA scan probe combines a shaped isokinetic inlet, flexible neck, sample hose and photometer control interface in a balanced handheld assembly. It lets the operator maintain the correct inlet orientation and scanning distance while viewing penetration response directly at the filter face. Remote valve and alarm controls reduce trips back to the base photometer during systematic media, frame and gasket scans.

주요 기능

Rectangular isokinetic inlet supports consistent sampling across the filter face.

Flexible neck allows comfortable nozzle alignment near ceilings and corners.

Handheld display keeps live penetration and alarm status in the operator's sightline.

Remote sampling controls streamline upstream, downstream and clear-air selection.

Secure hose and electrical connections maintain continuity during overlapping scan strokes.

Ergonomic grip reduces fatigue during large filter-bank inspections.

고객 제품 관심사

Effective filter scanning depends on stable inlet geometry, overlapping probe motion and continuous visibility of the photometer response.

Tilting the inlet during a scan can affect local sampling response.A shaped isokinetic nozzle and flexible neck make it easier to keep the inlet parallel to the filter face.

Looking away at a remote base unit can interrupt overlapping scan strokes.An integrated display and alarm indication keep essential response information at the probe.

Long overhead scans can cause wrist and shoulder fatigue.A balanced grip, lightweight neck and accessible controls support one-handed movement.

Loose hose or signal connections can invalidate a scan sequence.Positive-lock sample and electrical couplings resist movement during repeated passes.

일반적인 응용 프로그램

Manual scanning of installed HEPA and ULPA filtersFilter frame and gasket leak localizationCleanroom ceiling filter qualification생물 안전 캐비닛 인증Scanning difficult overhead and corner locations

기술 매개변수

Typical construction values for handheld scan probes are listed below; inlet geometry, neck length and interface features can be selected for the photometer and filter layout.

핵심 재료	Molded engineering-polymer handle, stainless sampling tube, flexible neck and isokinetic inlet nozzle
패널 두께	Typically 2.0-3.5 mm for the molded handheld housing
유효 폭	Approximately 90-160 mm across the sampling inlet according to nozzle selection
최대 길이	Approximately 450-750 mm including flexible neck and inlet nozzle
강철 면면 두께	Typically 0.8-1.5 mm for stainless sampling tube and nozzle components
코어 밀도	Approximately 7800-8000 kg/m³ for stainless sampling components
열전도도 (Thermal Conductivity)	Approximately 14-17 W/(m·K) for stainless sampling components
표면 마무리	Dark antistatic molded grip with satin stainless tube and blue rectangular inlet nozzle
접합 유형	Quick-connect aerosol hose fitting with locking circular electrical connector and interchangeable nozzle coupling
사용자 정의	의도된 응용 프로그램 및 운영 환경에 따라 사용할 수 있습니다.

사용 가능한 옵션

Rectangular and round isokinetic nozzlesStandard or extended flexible neckColor touchscreen or compact indicatorDifferent umbilical lengthsLeft- and right-handed L-probe adaptersProtective carrying case

Planning a HEPA Scan Probe specification?

치수, 설치 조건, 성능 목표 및 필요한 표면 마감을 보내십시오.

우리 팀과 대화하십시오.